Bearings

We select each reference with the needs of a preparer in mind: precise fit, proven materials, and clear compatibility with the most common setups in slot car competition and preparation.

All products in Bearings

Cojinetes inline autolubricantes
Last items in stock
Bearings

Self-lubricating inline bearings

Fabricante: NSR
Ref: NSR4868
€6.23
NSR self-lubricating bearings specifically designed for inline configuration with a 3/32" axle. Pack of 2 units intended for those who pay attention to every detail in the preparation of their slot car.
Cojinetes excentricos 0,3 mm
Last items in stock
Bearings

0.3 mm eccentric bearings

Fabricante: NSR
Ref: NSR4873
€6.22
NSR 0.3 mm eccentric bearings (ref. NSR4873) for precise axle height adjustment in slot car chassis. A tuning tool that makes a difference in the car's behaviour on track.
Cojinetes excentricos 0,5 mm
In Stock
Bearings

0.5 mm eccentric bearings

Fabricante: NSR
Ref: NSR4875
€6.28
NSR 0.5 mm eccentric bearings (ref. NSR4875) for precisely adjusting the height and geometry of your slot car. A small component with a real impact on track performance.
Bearings

Universal bearing metal chassis

Fabricante: Sloting Plus
Ref: SP051900
€3.68
Universal brass bearing from Sloting Plus, designed for metal, 3D or fibre chassis. Compatible with a shaft of Ø 2.38 mm (3/32'') and standard mounting hole of Ø 4.75 mm. Sold in a pack of 2 units.
Bearings

Reynard 2 KQ bearing

Fabricante: Sloting Plus
Ref: SP051101
€2.95
Reynard 2 KQ bearing from Sloting Plus in brass, designed for a 2.38 mm (3/32'') axle. Weighing only 0.32 g, it comes in a pack of 2 units. Reference SP051101.
Bearings

Hiper Lub universal bearing

Fabricante: Sloting Plus
Ref: SP051001
€4.10
The first self-lubricating brass bearing specifically designed for slot: it keeps the axle continuously lubricated thanks to its conical reservoir and its 0.20 mm hole. Compatible with anchors of Ø 4.5 to 5 mm. Bag with 2 units.
Bearings

RRSS Victor's 2.38mm axle joint

Fabricante: Sloting Plus
Ref: SP053025
€7.20
Victor's RRSS brass joint for 2.38 mm (3/32") axle, with a diameter of 3.80 mm and a thickness of 2 mm. Compatible with all Slot.it and Black Arrow cradles. Sold in a pack of 6 units, ready to install and fine-tune your car's transmission.
Bearings

Combi Plus bearing 31.6mm shaft 2.38mm

Fabricante: Sloting Plus
Ref: SP053101
€7.68
Combi Plus bearing from Sloting Plus in duraluminium and brass, 31.6 mm total length for shafts of 2.38 mm (3/32''). Designed for chassis of NINCO models such as Ferrari, Lamborghini, Audi R8, Ford GT, Ascari and Gallardo. Sold in a pack of 1 unit.
Bearings

Combi Plus bearing 31.0mm shaft 2.38mm

Fabricante: Sloting Plus
Ref: SP053100
€7.68
Combi Plus bearing made of duraluminium and brass for a 2.38 mm (3/32'') axle, with a total length of 31 mm. Compatible with NINCO models Mosler, Megane, Lexus, Supra and NSX, as well as with the rectangular base of NSR. Sold in a pack of 1 unit.
Bearings

Eccentric universal bearing 0.6mm

Fabricante: Sloting Plus
Ref: SP051201
€5.20
Brass eccentric universal bearing manufactured for a 2.38 mm (3/32'') axle with an eccentricity of 0.6 mm. Key component for precise adjustment of height and rear axle in slot cars. Bag containing 2 units.
Bearings

Eccentric universal bearing 0.3mm

Fabricante: Sloting Plus
Ref: SP051200
€5.20
Universal brass eccentric bearing for 2.38 mm (3/32'') axle, with an eccentricity of 0.3 mm. Allows precise adjustment of the height and position of the rear axle in the chassis. Pack of 2 units, each weighing 0.42 g.
Bearings

2 Metal ball bearings D-5mm

Fabricante: MITOOS
Ref: CXM188
€2.50
Two 5 mm diameter metal ball bearings (ref. CXM188) designed to reduce friction on your slot car's axles and extend the lifespan of the transmission. A simple upgrade with a direct impact on the smoothness of running.
Bearings

2 Ball bearings - metal pin D-5mm

Fabricante: MITOOS
Ref: CXM187
€1.53
Two ball bearings with a metal stub, diameter 5 mm, for slot cars. They reduce friction on the rear axle, improve track response, and extend the lifespan of the transmission.
Bearings

2 Ball bearings - nylon peg D-5mm

Fabricante: MITOOS
Ref: CXM186
€1.02
Pack of 2 ball bearings with nylon nipple and a diameter of 5 mm, designed to reduce friction on the axle and improve rolling smoothness in your competition or recreational slot cars.
Bearings

2 Brass bearings with long pin

Fabricante: MITOOS
Ref: CXM185
€1.84
Two brass bearings with a long pin (ref. CXM185) designed to provide a precise fit and a firm hold of the axle in slot car assemblies. A small component with a direct impact on rolling and track performance.
Bearings

2 Aluminium brass lip bearings

Fabricante: MITOOS
Ref: CXM184
€1.84
Two brass bearings with a lip and aluminium core designed to reduce friction on the axle and ensure precise and stable turning in your slot car setups. A solid solution for those who fine-tune every detail of the running gear.
2 Cojinetes nylon sin labio
Last items in stock
Bearings

2 Nylon side lip bearings

Fabricante: MITOOS
Ref: CXM181
€1.05
Two nylon bearings with side lip ref. CXM181, designed for smooth rotation and a firm fit of the axle in slot cars. A key component in any serious setup.
2 Cojinetes nylon sin labio
Last items in stock
Bearings

2 Nylon bearings without lip

Fabricante: MITOOS
Ref: CXM180
€1.05
Pack of 2 CXM180 lipless nylon bearings, designed to keep the axle spinning smoothly and without unnecessary friction. A discreet and effective solution for any serious slot car setup.
Cojinetes 3/32 mínima friccion estandard (X 2)
Last items in stock
Bearings

3/32 minimum friction bearings (X 2)

Fabricante: NSR
Ref: NSR4847
€5.20
NSR 3/32 bearings designed to minimise friction on the rear axle and improve track performance. Pack of 2 units of reference NSR4847, intended for those looking to maximise the performance of their slot car setup.
Cojinetes 3/32 mínima friccion estandard (X 2)
Last items in stock
Bearings

3/32 minimum friction bearings for classic cars (X 2)

Fabricante: NSR
Ref: NSR4846
€5.20
NSR standard low-friction bearings in 3/32 size, specifically designed for classic cars. They reduce friction on the axles and significantly improve track performance. Supplied in a pack of 2 units.
Showing 25-44 of 44 item(s)
Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.

Contáctanos por Whatsapp