Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

3D chassis, Fibre, Metal..

1/32 display base

Fabricante: 3DSRP

Ref: SRP010

€11.19

Pack of 3 display plates for 1:32 scale cars, manufactured by 3dsrp in ASA plastic using FDM 3D printing. A careful and functional way to present and protect your most valuable miniatures.

3D chassis, Fibre, Metal..

3D chassis Mirage Gr8

Fabricante: 3DSRP

Ref: SRP001034

€11.25

3D printed chassis using FDM technology in ASA plastic, specifically designed for the Mirage Gr8 body. A lightweight and flexible base intended for those looking to customise and fine-tune their slot car assembly with technical criteria.

3D chassis, Fibre, Metal..

3D chassis Opel Manta

Fabricante: 3DSRP

Ref: SRP001135

€12.00

Chassis made from ASA plastic using FDM 3D printing, specifically designed for the Opel Manta. Includes two adjustable rear height mushrooms, adjustable cover, and M2 x 6 extra flat head Phillips screws for a clean and precise fit.

3D chassis, Fibre, Metal..

3D chassis Audi R10

Fabricante: 3DSRP

Ref: SRP001035

€12.00

3D printed chassis using FDM technology, made from highly flexible ASA plastic, specifically designed for the Avant Slot body of the Audi R10. Inline configuration that optimises weight distribution and improves track performance.

3D chassis, Fibre, Metal..

Complete Raid Panda chassis

Fabricante: MITOOS

Ref: CXM905

€74.66

The Raid Panda CXM905 chassis comes assembled and ready to run with a total width of just 52 mm, 4x4 drive via toothed belts, and M040 wheel set for rally configuration. Everything you need to get out and compete without wasting a minute.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X1MM

Fabricante: Scaleauto

Ref: SC-1511

€3.49

Scaleauto adhesive counterweight sheet (100×50×1mm) to adjust the weight distribution of your slot car with complete freedom. Cut it to the exact size you need and stick it where the chassis needs it most.

Plastic Chassis

R chassis for Spyker C8R Hard. Black

Fabricante: Scaleauto

Ref: SC-6635A

€7.20

Replacement R chassis in black for the Spyker C8R Hard, reference SC-6635A. A key component to restore structural rigidity and the original handling of your slot car after an impact or wear.

Chasis R para De Tomaso Pantera Gr.3 Medium. Gris

Plastic Chassis

R chassis for De Tomaso Pantera Gr.3 Medium. Grey

Fabricante: Scaleauto

Ref: SC-6637B

€7.67

Specific replacement chassis for the Scaleauto De Tomaso Pantera Gr.3, in Medium size and grey colour. The reference SC-6637B ensures a perfect fit to restore or customise your slot car with complete reliability.

In Stock

Accessories

Mitoos pivoting spring

Fabricante: MITOOS

Ref: CXM104

€1.84

Pair of steel springs for Mitoos swing arm, with an outer diameter of 4.7 mm and a width of 4.5 mm. Direct replacement part for Panda chassis (M905) and 75mm chassis (M907), essential for maintaining suspension geometry in check.

Plastic Chassis

Radical SR-9 chassis ver.2

Fabricante: Scaleauto

Ref: SC-6612A2

€6.98

Replacement chassis Radical SR-9 ver.2 in standard hardness (black), reference SC-6612A2 from Scaleauto. A key component to maintain or restore your slot car with the original factory geometry and stiffness.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X2MM

Fabricante: Scaleauto

Ref: SC-1513

€3.60

Scaleauto adhesive counterweight (SC-1513) measuring 100×50×2 mm to adjust and optimise the weight distribution in your slot car. Easy to cut and place where you need it most to improve track stability.

Showing 313-323 of 323 item(s)