Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

3D chassis, Fibre, Metal..

Chassis 207 Block AW-R 0.5 EVO3 compatible Avant

Fabricante: Tectime

Ref: M-101013

€15.95

The Tectime 207 Block AW-R 0.5 EVO3 chassis brings competition technology to 1/32 slot racing with a new generation polymer, Anglewinder configuration, and a motor offset of 0.5 mm. Specifically designed for Avant bodies and rally stages, it offers flexibility, lightness, and traction that are hard to match in its category.

3D chassis, Fibre, Metal..

Subaru Block AW- R 0.5 EVO3 chassis compatible with Avant

Fabricante: Tectime

Ref: M-104313

€15.92

Subaru Block AW-R 0.5 EVO3 chassis from Tectime made of advanced high-flexibility polymer, with Anglewinder configuration and 0.5 mm offset. Fully compatible with the Avant body, it is the ideal component to maximise performance on any rally stage or speed circuit.

3D chassis, Fibre, Metal..

Chassis 207 Block AW-R 0.5 EVO3 compatible Avant

Fabricante: Tectime

Ref: M-101013

€15.92

Tectime chassis for Peugeot 207 body made of high-tech technical polymer, with specification Anglewinder R 0.5 EVO3 and motor offset of 0.5 mm. Fully compatible with Avant base and accessories, it offers controlled torsion, a low centre of gravity, and accommodates wheels from 16.2 mm to adjust the setup with complete freedom.

3D chassis, Fibre, Metal..

Evo X Block AW R 0.5 EVO3 compatible chassis Avant

Fabricante: Tectime

Ref: M-104413

€15.92

High competition chassis in technical polymer, designed by Tectime for Anglewinder configuration and compatible with Avant models. The R 0.5 EVO3 evolution offers controlled flexibility and a low centre of gravity, resulting in greater stability and more precise cornering.

3D chassis, Fibre, Metal..

Peugeot 208 Block-R AW 0.5 EVO3 chassis compatible with Scaleauto

Fabricante: Tectime

Ref: M-106413

€15.92

Tectime chassis for Peugeot 208 in Anglewinder configuration with Block-R EVO3 geometry and 0.5 mm offset. Made from high-tech polymer, it offers the ideal balance between torsion and rigidity for 1/32 slot racing. Compatible with Scaleauto models.

3DSRP SRP-PW102BL Peugeot 208 SCA chassis

3D chassis, Fibre, Metal..

Peugeot 208 SCA Chassis (PW-BL)

Fabricante: 3DSRP

Ref: SRP-PW102BL

€15.20

Competition chassis 3DSRP SRP-PW102BL with SCA standard, specifically designed for Peugeot 208 Rally4/R5 bodies in 1/32 scale. 3D printed using FDM technology and finished in PW-BL, it features a tighter motor angle that maximises traction, cornering stability, and overall efficiency in demanding rally stages.

Fabia R5/Rally2 Chassis SCA PW-BL | 3DSRP

3D chassis, Fibre, Metal..

Fabia R5/Rally2 SCA Chassis (PW-BL)

Fabricante: 3DSRP

Ref: SRP-PW101BL

€15.20

3D printed (FDM) chassis from the PW-BL line of 3DSRP, specifically designed for the Skoda Fabia R5 and Rally2 bodies in 1/32 scale. Its closed motor angle enhances traction efficiency and cornering performance, providing a solid foundation for competitive rally slot racing with real guarantees.

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible con Scaleauto

Out-of-Stock

3D chassis, Fibre, Metal..

Fabia Rally 2 AW-R 0.5 EVO3 chassis

Fabricante: Tectime

Ref: M-107613

€13.50

Tectime competition chassis for the Fabia Rally 2 in Anglewinder configuration with all-wheel drive and AFR (Active Front Rail) system. The EVO3 evolution with 0.5 mm offset improves cornering stability and accommodates wheels from 16.2 mm. Chassis only, without body.

View

Chasis Toyota Yaris WRC1 AW-R 0.5 EVO3 para Avant Slot

Out-of-Stock

3D chassis, Fibre, Metal..

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible with Scaleauto

Fabricante: Tectime

Ref: M-107513

€13.50

High competition chassis Tectime M-107513 in EVO3 polymer for the Scaleauto Skoda Fabia R5 body. AW-R 0.5 geometry with Anglewinder position, total traction AFR system, and compatibility with wheels from 16.2 mm. Body not included.

View

3D chassis, Fibre, Metal..

Toyota Yaris WRC1 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107313

€15.62

The Mustang Slot Design M-107313 chassis in EVO3 version is specifically designed for the Avant Slot Toyota Yaris WRC1 body. AW-R 0.5 geometry with the motor in Anglewinder position, high-tech flexible polymer, and compatibility with wheels from 16.2 mm. Chassis only, without body.

Out-of-Stock

3D chassis, Fibre, Metal..

Toyota Yaris WRC2 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107213

€15.92

The M-107213 chassis from Mustang Slot Design in EVO3 version takes your Avant Slot Toyota Yaris WRC2 to the next competitive level. Anglewinder R 0.5 configuration, high-performance polymer, and compatibility with wheels from 16.2 mm for a low profile and outstanding stability on the most demanding stages.

View

Chasis Bicom. Porsche 911RS/RSR 1973/74 SCA (Slotit)

3D chassis, Fibre, Metal..

Bicom chassis. Porsche 911RS/RSR 1973/74 SCA (Slotit)

Fabricante: 3DSRP

Ref: SRP-BC2047

€20.00

3D printed chassis with bi-component polymer (Bicom) using FDM technology, specifically designed for the Porsche 911RS/RSR 1973/74 SCA by Slot.it. It combines exceptional strength with flexibility and lightness, providing a solid base for preparing or restoring your slot car.

3D chassis, Fibre, Metal..

Chassis(Bicom)HYRSS Peugeot 9x8 LMH SCA

Fabricante: 3DSRP

Ref: SRP-HYR04SS

€20.00

3D printed bi-component polymer chassis using FDM technology, specifically designed for the Peugeot 9x8 LMH. It combines strength, lightness, and adjustable flexibility by cutting the joint between the motor mount lugs, allowing you to fine-tune the track behaviour to your liking.

Toyota Yaris Rally2 Chasis 3DP Extreme Angle - Avant Slot

3D chassis, Fibre, Metal..

Toyota Yaris Rally2 Chassis 3DP Extreme Angle - Avant Slot

Fabricante: HobbySlot Racing

Ref: HSR-2368.EA

€13.00

3D printed chassis with FDM technology from HobbySlot Racing for the Toyota Yaris Rally2. The Extreme Angle range offers the tightest drive angle on the market, achieving optimal weight distribution, outstanding traction, and stable and precise cornering in Rallyslot competition.

Chasis 3DP - Toyota Yaris WRC - Scalextric Extreme Angle

3D chassis, Fibre, Metal..

3DP Chassis - Toyota Yaris WRC - Scalextric Extreme Angle

Fabricante: HobbySlot Racing

Ref: HSR-2367.EA

€13.00

3D printed chassis using FDM technology from the Extreme Angle range by HobbySlot Racing, designed for the Scalextric Toyota Yaris WRC. Sidewinder configuration with a closed attack angle for Rallyslot competition: better weight distribution, superior traction, and stable and efficient cornering. Compatible with long can motor.

Chasis 3DP Extreme Angle - Porsche 911 997 - NSR

Out-of-Stock

3D chassis, Fibre, Metal..

3DP Chassis - Porsche 911 997 - NSR - Extreme Angle

Fabricante: HobbySlot Racing

Ref: HSR-2326.EA

€13.00

3D printed chassis using FDM technology and high flexibility plastic designed for the NSR Porsche 911 997. The Extreme Angle range from HobbySlot Racing pushes the transmission's attack angle to the limit for Rallyslot: improved weight distribution, maximum traction, and exceptionally stable cornering.

View

Chasis (Bicom)HYRSS Cadillac-V LMH SCA Body

3D chassis, Fibre, Metal..

Chassis (Bicom) HYRSS Cadillac-V LMH SCA Body

Fabricante: 3DSRP

Ref: SRP-HYR02SS

€20.00

HYRSS chassis made of 3D printed bi-component polymer using FDM technology, designed for the Cadillac-V LMH SCA body. It combines strength, flexibility, and lightness, and allows for the adjustment of the assembly's rigidity by cutting the joint between the motor support lugs.

Chasis 3D(Bicom)HYRSS M-HYBRID GTP SCA BODY

3D chassis, Fibre, Metal..

3D chassis, Lancia Delta S4 in Angle. For SRC Body.

Fabricante: 3DSRP

Ref: SRP1160WSC

€13.60

3D Rally chassis made of high-flexibility ASA plastic, printed with FDM technology in anglewinder configuration. Specifically designed for SRC body of the Lancia Delta S4. Includes adjustable cover and M2x4 extra flat head Phillips screws.

3D chassis, Fibre, Metal..

3D Chassis (Bicom) HYRSS M-HYBRID GTP SCA BODY

Fabricante: 3DSRP

Ref: SRP1159WSC

€13.60

3D Rally chassis from 3DSRP made of highly flexible ASA plastic using FDM printing. Designed for the HYRSS M-Hybrid GTP SCA Body, it includes an adjustable cover and M2x4 extra flat head Phillips screws for a clean and precise assembly.

Chasis 3d Power Bicom. Peugeot 208 Angle SCA Body

3D chassis, Fibre, Metal..

3D Power Bicom Chassis. Peugeot 208 Angle SCA Body

Fabricante: 3DSRP

Ref: SRP-PW11

€20.00

Chassis from the Power line of 3DSRP, made with a two-component polymer and FDM 3D printing for Peugeot 208 Angle SCA Body. Anglewinder reference SRP-PW11 that combines rigidity, lightness, and an optimised motor angle for stable traction and precise cornering.

Chasis Power Bicom. Porsche 992 GT Angle SCA

3D chassis, Fibre, Metal..

Power Bicom Chassis. Fabia R5/Rally2 Angle SCA Body

Fabricante: 3DSRP

Ref: SRP-PW10

€20.00

The 3DSRP Power Bicom Chassis takes the preparation of the Fabia R5/Rally2 to another level: 3D printed two-component polymer with an optimised anglewinder for increased traction, stability, and agility in corners. FDM manufacturing technology applied to competition slot cars.

Chasis 3D NFS (Bicomp.), Corvette C8.R (Banc/SLOT.IT). For NSR Body

3D chassis, Fibre, Metal..

3D Chassis NFS (Bicomp.), Corvette C8.R (Bench/SLOT.IT). For NSR Body

Fabricante: 3DSRP

Ref: SRP-NFS01

€20.00

3D NFS chassis made with a bi-component polymer and FDM printing by 3DSRP, specifically designed for the Corvette C8.R on a Slot.it base. Compatible with NSR body. It offers an outstanding combination of strength, flexibility, and weight reduction for demanding track setups.

3D chassis, Fibre, Metal..

3D Chassis (Bicom) HYRSS M-HYBRID GTP SCA BODY

Fabricante: 3DSRP

Ref: SRP-HYR03SS

€20.00

3D printed chassis by 3DSRP with FDM two-component polymer for the M-Hybrid GTP SCA Body. It combines strength, flexibility, and lightness, with the possibility of adjusting the rigidity of the assembly by cutting the connection between the lugs of the motor mount.

Chassis 3D Bicomponente, Porsche 992 GT (Para Banc/Slot.It). For SCA Body.

3D chassis, Fibre, Metal..

3D Two-Component Chassis, Porsche 992 GT (For Banc/Slot.It). For SCA Body.

Fabricante: 3DSRP

Ref: SRP-BC2045

€20.00

3D printed chassis with bi-component polymer and FDM technology, specifically designed for the Porsche 992 GT with SCA body. It combines strength, flexibility, and lightness in a single component, intended for Bancada and Slot.it motorisations.

Showing 25-48 of 332 item(s)