Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

Plastic Chassis

FLY EVO3 Audi Quattro chassis for RT3 Motor Mounts

Fabricante: Scaleauto

Ref: SC-9100B

€7.77

Replacement chassis FLY EVO3 specific for the Audi Quattro, designed to work with RT3 motor mounts. The reference SC-9100B from Scaleauto provides you with the structural base you need for a clean and reliable preparation of your slot car.

3D chassis, Fibre, Metal..

3DP Callaway Scaleauto chassis

Fabricante: Scaleauto

Ref: SC-9123B10

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for all Scaleauto Callaway C7 models with RT4 motor mount at 12°. A replacement and tuning part that combines lightness, dimensional accuracy, and total compatibility with the Scaleauto range.

Out-of-Stock

Plastic Chassis

LOLA T280/290 SOFT BLUE CHASSIS

Fabricante: NSR

Ref: NSR1628

€7.62

NSR Soft Blue chassis specifically for the Lola T280/290 models, reference NSR1628. A key replacement part to fine-tune the rigidity of the assembly and achieve maximum performance on the track.

View

Plastic Chassis

LOLA T280/290 MEDIUM BLACK CHASSIS

Fabricante: NSR

Ref: NSR1629

€7.62

Medium Black chassis specifically for the NSR Lola T280/290 (ref. NSR1629). A key component to adjust the stiffness of the assembly and fine-tune the behaviour of your car according to the track and driving style.

Out-of-Stock

Plastic Chassis

LOLA T280/290 HARD WHITE CHASSIS

Fabricante: NSR

Ref: NSR1630

€7.62

NSR replacement chassis in White Hard version for the Lola T280 and T290 models. A key component to adjust the stiffness of your slot car and optimise track performance according to the circuit and your driving preferences.

View

Plastic Chassis

LOLA T280/290 EXTRAHARD GREEN CHASSIS

Fabricante: NSR

Ref: NSR1631

€7.62

NSR Extrahard chassis in green for the Lola T280 and T290 models. A replacement part reference for those seeking rigidity, precision, and the reliability that characterises NSR in preparation and competition.

Chasis 3DP Toyota Yaris Avantslot soporte RT3

Out-of-Stock

3D chassis, Fibre, Metal..

3DP chassis Toyota Yaris Avantslot RT3 support

Fabricante: Scaleauto

Ref: SC-9124H1

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for the Avant Slot Toyota Yaris body and compatible with the Scaleauto RT3 motor mount. A solid and precise base to prepare your racing car with confidence.

View

3D chassis, Fibre, Metal..

3DP chassis Peugeot 9x8 V3 RT3 support

Fabricante: Scaleauto

Ref: SC-9124B04

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for the Scaleauto Peugeot 9x8 V3 with RT3 motor mount. A spare or tuning part that provides geometric precision and lightness to the assembly.

3D chassis, Fibre, Metal..

3DP Chassis Caddy LMDH V3 RT3 support

Fabricante: Scaleauto

Ref: SC-9124B03

€14.30

3D printed chassis using Scaleauto SLS sintering, specifically designed for the RT3 motor mount. A high-precision part to build or upgrade your Caddy LMDH V3 with competition guarantees.

3D chassis, Fibre, Metal..

3DP chassis Porsche 963 V3 RT3 support

Fabricante: Scaleauto

Ref: SC-9124B01V3

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for the Porsche 963 in its V3 version with support for Scaleauto RT3 motor. A precision solution for those seeking maximum track performance without compromise.

3D chassis, Fibre, Metal..

3DP chassis Honda NSX V3 RT4 support

Fabricante: Scaleauto

Ref: SC-9123B05V3

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for Scaleauto Honda NSX GT3 models with RT4 motor mount at 12°. Third version optimised for those seeking the perfect balance between stiffness, geometry, and track performance.

Chasis 3DP SCX TOYOTA YARIS WRC para Soporte Motor

3D chassis, Fibre, Metal..

3DP Chassis SCX TOYOTA YARIS WRC for Motor Support

Fabricante: Scaleauto

Ref: SC-9124F05

€14.30

3D printed chassis using Scaleauto's SLS technology, specifically designed for the SCX Toyota Yaris WRC with RT3 motor mount. A preparation piece that combines dimensional precision and lightness to enhance track performance.

Chasis 3DP Scaleauto Mitsubishi Evor para Soporte

Out-of-Stock

3D chassis, Fibre, Metal..

Scaleauto 3DP chassis Mitsubishi Evor for Support

Fabricante: Scaleauto

Ref: SC-9124B02

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for the Scaleauto Mitsubishi Evo R and compatible with the RT3 motor mount. A direct solution for setups that demand precision from the ground up.

View

Plastic Chassis

Formula 1 2024 2+2 Wheel Covers

Fabricante: Policar

Ref: PO-PCS10T

€6.92

Pack 2+2 of Formula 1 2024 wheel covers from Policar, designed to give your slot cars the most faithful visual finish to the real cars of the season. A small detail that makes a big difference on the track.

Plastic Chassis

Porsche 908/3 Extra Hard Green Chassis

Fabricante: NSR

Ref: NSR1603

€9.82

NSR replacement chassis for the Porsche 908/3, in Extra Hard version and finished in green. A direct factory piece to maintain or adjust the flexibility of your slot car according to the demands of the track and your driving style.

1/32 spare parts

Slot.it 3D suspension bridges

Fabricante: ACSlot

Ref: ACS002A

€2.50

Pack of 5 3D suspension bridges specifically designed for Slot.it chassis. A small component with a significant impact on the dynamic behaviour of the car: precision and reliability from a brand that needs no introduction in slot racing.

Chasis 3D Ferrari 308 GTB AvantSlot anglewinder

3D chassis, Fibre, Metal..

3D Chassis Ferrari 308 GTB AvantSlot anglewinder

Fabricante: ACSlot

Ref: ACS028

€12.00

3D anglewinder chassis from AvantSlot (ref. ACS028) specifically designed for the Ferrari 308 GTB. A tuning piece that provides structural rigidity and an optimised geometry to achieve maximum performance on track.

Chasis 3D Peugeot 207 AvantSlot anglewinder

Out-of-Stock

3D chassis, Fibre, Metal..

3D chassis Peugeot 207 AvantSlot anglewinder

Fabricante: ACSlot

Ref: ACS003

€12.00

3D printed chassis specifically designed for the AvantSlot Peugeot 207 in anglewinder configuration. A solid base to prepare your slot car with precision and gain hundredths where it matters most.

View

Chasis 3D Peugeot 307 Ninco Anglewinder Monoblock

3D chassis, Fibre, Metal..

3D Chassis Peugeot 307 Ninco Anglewinder Monoblock

Fabricante: ACSlot

Ref: ACS004PRO

€15.00

3D printed chassis from ACSlot specifically designed for the Ninco Peugeot 307 in monoblock anglewinder configuration. Made from flexible and lightweight material, it allows for better dynamic performance and paves the way for serious competitive preparation.

Chasis 3DP P-963 Hypercar GTP de Sc Soporte Motor RT4

Out-of-Stock

Chassis

3DP Chassis P-963 Hypercar GTP by Sc Motor Support RT4

Fabricante: Scaleauto

Ref: CCS-9123B13M

€17.83

SLS 3D printed chassis for the Scaleauto Porsche 963 Hypercar GTP, in a limited edition for the 24h MasterSlot 2024. Designed for the RT4 motor mount at 12°, with the minimum possible weight and lateral body supports in carbon fibre.

View

Chasis 3DP P-9x8 Hypercar de Scaleauto para Soporte Motor RT4

Out-of-Stock

Chassis

Scaleauto 3DP P-9x8 Hypercar chassis for RT4 Motor Mount

Fabricante: Scaleauto

Ref: CCS-9123B15M

€17.83

Exclusive limited edition for the 24h MasterSlot 2024: the P-9x8 Hypercar chassis from Scaleauto combines SLS 3D printing with carbon fibre body supports for the minimum possible weight. Designed for the RT4 motor mount at 12º and all models of the Peugeot Hypercar.

View

Chasis 3DP Caddy Hypercar LMDH de Sc RT4

Chassis

3DP Chassis Caddy Hypercar LMDH by Sc RT4

Fabricante: Scaleauto

Ref: CCS-9123B16M

€17.96

Chassis manufactured using SLS 3D printing in a limited edition for the 24h MasterSlot 2024. Specifically designed for the Scaleauto RT4 motor mount at 12° and all models of the Cadillac Hypercar LMDH, with lateral body supports in carbon fibre and the minimum possible weight.

Plastic Chassis

Porsche 991.2 chassis - hard R2.0

Fabricante: Scaleauto

Ref: SC-6665a

€7.43

Scaleauto chassis for Porsche 991.2 in hard version R2.0: a preparation base designed for those seeking stability and consistency on track. Calibrated stiffness for demanding technical circuits and precise driving in championship or advanced practice.

Plastic Chassis

R In-Flex chassis for MB-A GT3 Hard

Fabricante: Scaleauto

Ref: SC-6662A

€7.90

The Scaleauto R In-Flex SC-6662A chassis is specifically designed for the MB-A GT3 in Hard version, offering structural rigidity that enhances the car's dynamic response and facilitates precise tuning adjustments.

Showing 49-72 of 255 item(s)