Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

Chasis 9x8 LmdH / Hypercar Negro - Standard Duro

Plastic Chassis

Chassis 9x8 LmdH / Hypercar Black - Standard Hard

Fabricante: Scaleauto

Ref: SC-6675A

€7.67

Injected plastic chassis in black for the Scaleauto 9x8 LmdH/Hypercar, with a thickness of only 0.65 mm, standard hardness, and RT4 motor mount. Adjustable front axle height, six optional suspension points, and front and rear body mounting using M2.5 screws.

Plastic Chassis

Chassis 9x8 LmdH / Hypercar Grey - Medium

Fabricante: Scaleauto

Ref: SC-6675B

€7.67

Injected plastic chassis in grey colour and medium hardness specifically for the Scaleauto 9x8 LmdH/Hypercar. With just 0.65 mm thickness, adjustable front axle height and six optional suspension points for the bracket, it provides a solid starting point to adjust your car to the conditions of each track.

Chasis negro duro Scaleauto SC-6681A de 0,65 mm para Cadillac V-LmdH.

Plastic Chassis

CADILLAC V-LMDH CHASSIS / BLACK HYPERCAR - HARD STANDARD

Fabricante: Scaleauto

Ref: SC-6681A

€7.92

High-precision structural base for the Scaleauto Cadillac V-LmdH. The Standard Duro version in black provides maximum rigidity and stable geometry, with an adjustable front axle height and 6 optional suspension points to fine-tune track performance according to the type of circuit.

Chasis Cadillac V-LmdH / Hypercar Gris - Medio

Plastic Chassis

Cadillac V-LmdH / Hypercar Grey Chassis - Medium

Fabricante: Scaleauto

Ref: SC-6681B

€7.67

Injected plastic chassis of minimal thickness (0.65 mm) specifically designed for the Scaleauto Cadillac V-LmdH / Hypercar. Grey colour, medium hardness, compatible with RT4 motor, front axle adjustable in height and up to 6 optional suspension points for the bracket.

Chasis 3DP Sideways GT3 McLaren 720 para Soporte Motor RT4.

3D chassis, Fibre, Metal..

3DP Chassis Sideways GT3 McLaren 720 for RT4 Motor Mount.

Fabricante: Scaleauto

Ref: SC-9123C01

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for the Sideways McLaren 720 GT3 models with Scaleauto RT4 motor mount at 12°. Dimensional accuracy, lightweight and structural rigidity in a single ready-to-mount piece.

Plastic Chassis

CORVETTE C8R EXTRAHARD GREEN CHASSIS

Fabricante: NSR

Ref: NSR1627

€7.62

NSR Extrahard Green chassis specifically for the Corvette C8R. Greater structural rigidity to fine-tune the setup and gain consistency in every corner. A key component if you want to get the maximum performance from your slot car.

Plastic Chassis

CORVETTE C8R HARD WHITE CHASSIS

Fabricante: NSR

Ref: NSR1626

€7.62

NSR White Hard chassis specifically for the Corvette C8R. Greater structural rigidity for those seeking direct response on fast tracks and a more aggressive setup.

Plastic Chassis

CORVETTE C8R SOFT BLUE CHASSIS

Fabricante: NSR

Ref: NSR1624

€7.62

NSR Soft Blue chassis specifically for the Corvette C8R, designed to fine-tune track behaviour by adjusting the flexibility level of the assembly. Reference NSR1624, ideal for tuners and club drivers seeking that extra tenth of performance.

Chasis 3DP Sideways GT3 BMW M4 para Soporte Motor RT4.

3D chassis, Fibre, Metal..

3DP Chassis Sideways GT3 BMW M4 for RT4 Motor Mount.

Fabricante: Scaleauto

Ref: SC-9123C06

€14.30

Chassis manufactured using 3D printing by SLS sintering from Scaleauto, compatible with all Sideways GT3 BMW M4 models and specifically designed for the Scaleauto RT4 motor mount at 12°. A technical piece that makes a difference in car preparation.

3D chassis, Fibre, Metal..

3DP Chassis Oreca RT4

Fabricante: Scaleauto

Ref: SC-9123A05

€14.30

Chassis manufactured using 3D printing by SLS sintering, specifically designed for Slot.it Oreca 07 models with reference CA55 and Scaleauto RT4 motor mount at 12°. A solid and precise base for high-level setups.

Plastic Chassis

HSV-010 Hard chassis (black) for RT4

Fabricante: Scaleauto

Ref: SC-6632A

€7.67

Hard version chassis in black for the Scaleauto HSV-010, specifically designed for the RT4 system. A solid and precise base for those seeking consistency and rigidity in every race session.

Plastic Chassis

R chassis for Porsche 991 GT3 Hard

Fabricante: Scaleauto

Ref: SC-6640A

€7.67

Hard configuration R chassis for the Scaleauto Porsche 991 GT3. A direct replacement that allows for adjustment of the assembly's stiffness and keeps the car at its best setup, whether for club sessions or competition.

Plastic Chassis

Peugeot 208 T16 hard chassis R1.7

Fabricante: Scaleauto

Ref: SC-6642A

€7.67

R1.7 hardness chassis specifically for the Scaleauto Peugeot 208 T16. Designed for those seeking greater structural rigidity and more predictable behaviour on track, whether in club sessions or competition preparation.

Plastic Chassis

Subaru Impreza WRC typ2 chassis. Hard

Fabricante: Scaleauto

Ref: SC-6648A

€7.67

Scaleauto replacement chassis (SC-6648A) for the Subaru Impreza WRC typ2, in a hard version. Designed for those seeking greater structural rigidity and a more direct response on track, while maintaining the original geometry of the model.

Plastic Chassis

Subaru Impreza WRC typ2 chassis. medium

Fabricante: Scaleauto

Ref: SC-6648B

€7.67

Scaleauto replacement chassis (SC-6648B) specific for the Subaru Impreza WRC typ2 in medium configuration. The structural base that your slot car needs to maintain optimal running conditions and track response.

3DP SCX Audi S1 WRX para Soporte Motor RT3.

3D chassis, Fibre, Metal..

CHASSIS EDP SCX AUDI S1 WRX FOR MOTOR MOUNT

Fabricante: Scaleauto

Ref: SC-9124F02

€14.30

Chassis manufactured by Scaleauto using 3D printing through SLS sintering, specifically designed to accommodate the RT3 motor mount in all SCX Audi S1 WRX models. Fit precision and compatibility guaranteed with the Scaleauto range of mounts.

Plastic Chassis

BMW Z4 GT4 MEDIUM CHASSIS R1.5. GREY

Fabricante: Scaleauto

Ref: SC-6634B

€7.67

Scaleauto SC-6634B replacement chassis specific for the BMW Z4 GT4, in medium configuration R1.5 and grey finish. A solid and well-calibrated base to keep your slot car in top condition or to prepare your next competition setup.

Chasis 3DP SRC Porsche 919 Hybrid LMP para Soporte Motor RT3

3D chassis, Fibre, Metal..

3DP SRC chassis Porsche 919 Hybrid LMP for RT3 motor mount

Fabricante: Scaleauto

Ref: SC-9124E03

€14.30

3D printed chassis manufactured by Scaleauto for the SRC body of the Porsche 919 Hybrid LMP, specifically designed for the RT3 motor mount. A solid preparation base for those seeking performance and precise fit on track.

Chasis 3DP Sideways GT3 McLaren 720 para Soporte Motor RT3.

3D chassis, Fibre, Metal..

3DP Chassis Sideways GT3 McLaren 720 for RT3 Motor Mount.

Fabricante: Scaleauto

Ref: SC-9124C01

€14.30

Chassis manufactured with 3D printing by SLS sintering, designed by Scaleauto for all Sideways McLaren 720 GT3 models. Compatible with the RT3 motor mount, it combines dimensional precision and lightness to get the most out of your car on track.

Chasis P-963 GTP / Hypercar Gris - Standard Blando

Plastic Chassis

Chassis P-963 GTP / Hypercar Grey - Soft

Fabricante: Scaleauto

Ref: SC-6673B

€7.67

Injected plastic chassis of minimal thickness for the Porsche 963 LMDH GTP/Hypercar. Soft hardness, RT4 motor mount, adjustable front axle height, and six optional suspension points: a serious preparation base for club competition.

Chasis Mitsubishi lancer EVO Hard -Inflex 2.0

Plastic Chassis

Chassis P-963 GTP / Hypercar Black - Standard Hard

Fabricante: Scaleauto

Ref: SC-6673A

€10.15

Injected plastic chassis in black with standard hardness, specifically designed for the Scaleauto Porsche 963 LMDH GTP. With a thickness of only 0.65 mm, adjustable front axle height, and RT4 motor mount, it is the ideal base for preparing and fine-tuning your competition car with precision.

Plastic Chassis

Mitsubishi Lancer EVO Medium Grey Chassis - Inflex 2.0

Fabricante: Scaleauto

Ref: SC-6669B

€7.67

Scaleauto SC-6669B chassis specifically for the Mitsubishi Lancer EVO, in Medium version with Inflex 2.0 flex and finished in grey. A solid base to prepare your slot car with the right balance between rigidity and absorption of track imperfections.

Plastic Chassis

Mitsubishi Lancer EVO Hard Chassis - Inflex 2.0

Fabricante: Scaleauto

Ref: SC-6669A

€7.67

Scaleauto SC-6669A Hard-Inflex 2.0 chassis specifically for the Mitsubishi Lancer EVO. A solid base with the right flex to achieve maximum performance on track without compromising corner stability.

Chasis 3DP Sideways GT3 Lexus RCF para Soporte Motor RT4

3D chassis, Fibre, Metal..

3DP Chassis Sideways GT3 Lexus RCF for RT4 Motor Mount

Fabricante: Scaleauto

Ref: SC-9123C05

€14.30

Chassis manufactured using 3D printing by Scaleauto, specifically designed to accommodate the Sideways GT3 Lexus RCF body along with the RT4 motor mount. A precision piece intended for those seeking the exact combination of body and mechanics.

Showing 49-72 of 194 item(s)