Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

Chasis Ford GT GT3 Negro - SWFGTA - Sideways

Plastic Chassis

Black Ford GT GT3 Chassis

Fabricante: Sideways

Ref: SWFGTA

€5.70

Official Sideways replacement chassis for the Ford GT GT3 in black finish. A key component to keep your slot car in perfect condition or to undertake any preparation project with confidence.

CXM127 - Set soportes carrocería universal Mitoos Cartrix

1/32 spare parts

Universal body mount set

Fabricante: MITOOS

Ref: CXM127

€1.80

Two steel rods and four plastic tubes: everything needed to securely attach bodies to Mitoos raid chassis with precision and firmness. A complete kit ready to assemble.

SWNSA1 - Chasis Nissan Skyline Turbo Flexy de Sideways

Plastic Chassis

Nissan Skyline Turbo Flexy chassis

Fabricante: Sideways

Ref: SWNSA1

€6.90

Sideways Flexy chassis specifically for the Nissan Skyline Turbo (ref. SWNSA1). Designed to enhance the car's adaptability on track, promoting a more consistent contact of the guide and braids across all types of circuits.

SC-6664B - Chasis R20 In-Flex para SRT VIper GTS-R 2019 Medium de Scaleauto

Plastic Chassis

R20 In-Flex chassis for SRT Viper GTS-R 2019 Medium

Fabricante: Scaleauto

Ref: SC-6664B

€7.43

The Scaleauto R20 In-Flex Medium chassis (SC-6664B) is specifically designed for the SRT Viper GTS-R 2019, combining the structural rigidity of the R20 system with controlled flex that translates into greater grip and stability during racing.

SC-6662B -Chasis R In-Flex para MB-A GT3 Medium de Scaleauto

Plastic Chassis

R In-Flex chassis for MB-A GT3 Medium

Fabricante: Scaleauto

Ref: SC-6662B

€7.52

The Scaleauto R In-Flex SC-6662B chassis is specifically designed for the MB-A GT3 Medium body, providing the rigidity and controlled flex that the most demanding drivers need to fine-tune track performance.

SC-6650B - Chasis R para A7R GT3 Gris - Medium

Plastic Chassis

Chassis R for A7R GT3 Grey - Medium

Fabricante: Scaleauto

Ref: SC-6650B

€7.43

Original Scaleauto chassis (ref. SC-6650B) specific for the A7R GT3, in grey Medium size. A direct replacement part to restore your slot car to factory optimal conditions without compromises.

SC-6642B - Chasis R para P.208 T16 Gris - Medium de Scaleauto

Plastic Chassis

Chassis R for P.208 T16 Grey - Medium

Fabricante: Scaleauto

Ref: SC-6642B

€7.52

Replacement R chassis in grey and Medium hardness for the Scaleauto Peugeot 208 T16 (ref. SC-6642B). The original part you need to maintain or customise your slot car in perfect racing condition.

SRC RM1402 - Set J.T Altura Carrocería Ford Capri

Accessories

Set J.T Body Height Ford Capri

Fabricante: SRC

Ref: SRCRM1402

€2.45

Precisely adjust the body height of your SRC Ford Capri (2+2) with this set of O-rings. It includes 2 rings of 1 mm and 2 rings of 2 mm to find the exact balance between aerodynamics and track handling.

3D chassis, Fibre, Metal..

Complete Raid Panda chassis

Fabricante: MITOOS

Ref: CXM905

€74.66

The Raid Panda CXM905 chassis comes assembled and ready to run with a total width of just 52 mm, 4x4 drive via toothed belts, and M040 wheel set for rally configuration. Everything you need to get out and compete without wasting a minute.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X1MM

Fabricante: Scaleauto

Ref: SC-1511

€3.49

Scaleauto adhesive counterweight sheet (100×50×1mm) to adjust the weight distribution of your slot car with complete freedom. Cut it to the exact size you need and stick it where the chassis needs it most.

Plastic Chassis

Flex chassis BMW 320

Fabricante: Sideways

Ref: SW320/A1

€7.43

The Flex Chassis BMW 320 (SW320/A1) is the foundation for building a more precise and balanced setup. Designed to improve track performance, it provides the right amount of flexibility your car needs to maintain contact with the track in every corner.

Plastic Chassis

R chassis for Spyker C8R Hard. Black

Fabricante: Scaleauto

Ref: SC-6635A

€7.20

Replacement R chassis in black for the Spyker C8R Hard, reference SC-6635A. A key component to restore structural rigidity and the original handling of your slot car after an impact or wear.

Chasis R para De Tomaso Pantera Gr.3 Medium. Gris

Plastic Chassis

R chassis for De Tomaso Pantera Gr.3 Medium. Grey

Fabricante: Scaleauto

Ref: SC-6637B

€7.67

Specific replacement chassis for the Scaleauto De Tomaso Pantera Gr.3, in Medium size and grey colour. The reference SC-6637B ensures a perfect fit to restore or customise your slot car with complete reliability.

Plastic Chassis

Chassis for Capri Zakspeed

Fabricante: Sideways

Ref: SWCZ/A

€5.20

Original replacement chassis for the Sideways Ford Capri Zakspeed (ref. SWCZ/A). Ideal for restoring or preparing your slot car without compromising geometry or track performance.

In Stock

Accessories

Mitoos pivoting spring

Fabricante: MITOOS

Ref: CXM104

€1.84

Pair of steel springs for Mitoos swing arm, with an outer diameter of 4.7 mm and a width of 4.5 mm. Direct replacement part for Panda chassis (M905) and 75mm chassis (M907), essential for maintaining suspension geometry in check.

Plastic Chassis

Radical SR-9 chassis ver.2

Fabricante: Scaleauto

Ref: SC-6612A2

€6.98

Replacement chassis Radical SR-9 ver.2 in standard hardness (black), reference SC-6612A2 from Scaleauto. A key component to maintain or restore your slot car with the original factory geometry and stiffness.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X2MM

Fabricante: Scaleauto

Ref: SC-1513

€3.60

Scaleauto adhesive counterweight (SC-1513) measuring 100×50×2 mm to adjust and optimise the weight distribution in your slot car. Easy to cut and place where you need it most to improve track stability.

Showing 97-113 of 113 item(s)