Chassis

We select each chassis based on real technical criteria: compatibility with the base, degree of flex, and track system. If you have any doubts about what fits your car or your regulations, we are here to guide you.

All products in Chassis

3D chassis, Fibre, Metal..

Complete Raid Panda chassis

Fabricante: MITOOS

Ref: CXM905

€74.66

The Raid Panda CXM905 chassis comes assembled and ready to run with a total width of just 52 mm, 4x4 drive via toothed belts, and M040 wheel set for rally configuration. Everything you need to get out and compete without wasting a minute.

Chasis R para Porsche 935 Gr.5 Hard. Negro

Out-of-Stock

Plastic Chassis

R chassis for Porsche 935 Gr.5 Hard. Black

Fabricante: Scaleauto

Ref: SC-6639A

€7.20

Replacement chassis type R in hard version and black finish, specifically designed for the Scaleauto Porsche 935 Gr.5 (ref. SC-6639A). The mechanical base you need to maintain or fine-tune the geometry of your car and adapt it to your driving style on track.

View

Chasis 3D Peugeot 207 Avant Slot Monochasis

Out-of-Stock

3D chassis, Fibre, Metal..

3D Chassis Peugeot 207 Avant Slot Monochassis

Fabricante: Sloting Plus

Ref: SP601035

€14.40

3D ABS plastic chassis manufactured by Sloting Plus for the Avant Slot Peugeot 207, featuring a fixed mount and an approximate weight of 9.4 g. Designed to accommodate Sloting Plus guides with a 3.70 mm hub and enhance the performance of your Peugeot 207 on track.

View

3D chassis, Fibre, Metal..

3D Chassis Seat Leon Ninco

Fabricante: Sloting Plus

Ref: SP600010

€13.95

3D chassis made of ABS plastic for the Ninco Seat Leon, designed to fit on Slot.it bases. Each bag includes 1 chassis and 12 M2 x 5 mm allen screws, everything needed for a clean and secure installation.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X1MM

Fabricante: Scaleauto

Ref: SC-1511

€3.49

Scaleauto adhesive counterweight sheet (100×50×1mm) to adjust the weight distribution of your slot car with complete freedom. Cut it to the exact size you need and stick it where the chassis needs it most.

Plastic Chassis

R chassis for Spyker C8R Hard. Black

Fabricante: Scaleauto

Ref: SC-6635A

€7.20

Replacement R chassis in black for the Spyker C8R Hard, reference SC-6635A. A key component to restore structural rigidity and the original handling of your slot car after an impact or wear.

Chasis R para De Tomaso Pantera Gr.3 Medium. Gris

Plastic Chassis

R chassis for De Tomaso Pantera Gr.3 Medium. Grey

Fabricante: Scaleauto

Ref: SC-6637B

€7.67

Specific replacement chassis for the Scaleauto De Tomaso Pantera Gr.3, in Medium size and grey colour. The reference SC-6637B ensures a perfect fit to restore or customise your slot car with complete reliability.

In Stock

Accessories

Mitoos pivoting spring

Fabricante: MITOOS

Ref: CXM104

€1.84

Pair of steel springs for Mitoos swing arm, with an outer diameter of 4.7 mm and a width of 4.5 mm. Direct replacement part for Panda chassis (M905) and 75mm chassis (M907), essential for maintaining suspension geometry in check.

Plastic Chassis

Radical SR-9 chassis ver.2

Fabricante: Scaleauto

Ref: SC-6612A2

€6.98

Replacement chassis Radical SR-9 ver.2 in standard hardness (black), reference SC-6612A2 from Scaleauto. A key component to maintain or restore your slot car with the original factory geometry and stiffness.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X2MM

Fabricante: Scaleauto

Ref: SC-1513

€3.60

Scaleauto adhesive counterweight (SC-1513) measuring 100×50×2 mm to adjust and optimise the weight distribution in your slot car. Easy to cut and place where you need it most to improve track stability.

Showing 145-154 of 154 item(s)