Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

Piñón 10d. Laton ø5,5mm para eje de 2mm.

Bronze

10-tooth brass pinion ø5.5mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1093A55

€2.95

Brass pinion with 10 teeth and an outer diameter of 5.5 mm, designed for 2 mm shafts. Manufactured by Scaleauto (ref. SC-1093A55), it is equivalent to the SI-PI10 and fits perfectly in transmission setups that demand accuracy and reliability.

Piñón 10d. M50 Latón para Eje Motor 1.5mm di 6mm

1/32 spare parts

10d Pinion M50 Brass for 1.5mm Motor Shaft di 6mm

Fabricante: Scaleauto

Ref: SC-1297

€3.02

Scaleauto SC-1297 brass pinion with 10 teeth, module 50, designed for a 1.5 mm motor shaft with an outer diameter of 6 mm. An essential part to keep the transmission in check and fine-tune the gear ratio of your slot car.

Piñón 8d. M50 Latón para Eje Motor 1.5mm. d 5.5mm

1/32 spare parts

8d Pinion M50 Brass for 1.5mm Motor Shaft. d 5.5mm

Fabricante: Scaleauto

Ref: SC-1295A55

€3.02

8-tooth pinion, module 50, made of brass by Scaleauto. Specifically designed for 1.5 mm diameter motor shafts, with an outer diameter of 5.5 mm. A precision transmission component for your most demanding slot car setups.

Piñón 8d. M50 Latón para Eje Motor 1.5mm. diam. 5.

1/32 spare parts

8t pinion M50 Brass for 1.5mm motor shaft.

Fabricante: Scaleauto

Ref: SC-1295

€3.02

8-tooth pinion, module 50, made of brass by Scaleauto (SC-1295). Designed for a 1.5 mm motor shaft with an outer diameter of 5.0 mm: the foundation of a reliable and adjustable transmission in any slot configuration.

Piñon no friction 10 d 5,5 mm Formula 22 evo3

Bronze

Non-friction pinion 10 d 5.5 mm Formula 22 evo3

Fabricante: NSR

Ref: NSR6710EVO3

€6.35

No Friction 10-tooth pinion with a 5.5 mm pitch from NSR, specifically designed for the Formula 22 Evo3 chassis. Minimises friction in the transmission to extract maximum performance from your motor on every lap.

piñón 10d. M50 poliamida para Eje 1,5mm 5mm diamet

Nylon

10t pinion M50 polyamide for 1.5mm axle 5mm diameter

Fabricante: Scaleauto

Ref: SC-1293

€3.02

10-tooth pinion module 50 made of polyamide by Scaleauto, designed for 1.5 mm axles with a 5 mm outer diameter. Lightweight, precise, and silent: a key component to keep the transmission in top condition and maximise every lap on track.

Out-of-Stock

Ergal

13d ergal pinion 6.5mm shaft 2mm

Fabricante: Scaleauto

Ref: SC-1096E65

€4.70

13-tooth pinion made of ergal, with a pitch diameter of 6.5 mm and a shaft of 2 mm. A lightweight and precise piece from Scaleauto to fine-tune the transmission of your slot car and get the most out of every race.

View

Ergal

Removable pinion 12d M50 7.5mm ergal 2mm shaft screw

Fabricante: Scaleauto

Ref: SC-1072E75

€6.30

Scaleauto removable pinion with 12 teeth, module 50, diameter 7.5 mm, made of ergal and screw fixation for 2 mm axles. A lightweight and durable piece to optimise the transmission of your competition slot car.

Ergal

Removable Pinion 14d. M50 ø7.0mm in Ergal for axle

Fabricante: Scaleauto

Ref: SC-1074E70

€6.32

Scaleauto removable pinion with 14 teeth, module 50 and shaft diameter of 7.0 mm, made of Ergal. Lightweight and durable to fine-tune the transmission of your slot car and get the most out of each gear ratio.

Ergal

Removable Pinion 13d. M50 ø7.0mm in Ergal for axle

Fabricante: Scaleauto

Ref: SC-1073E70

€6.32

Scaleauto removable pinion with 13 teeth, module 50 and shaft diameter of 7.0 mm, made of Ergal. A lightweight and durable piece designed for those who fine-tune the transmission to the millimetre in their competition setups.

Ergal

Removable pinion 12d. M50 ø7.0mm in Ergal for axle

Fabricante: Scaleauto

Ref: SC-1072E70

€6.32

Scaleauto removable pinion with 12 teeth, module 50 and shaft diameter of 7.0 mm made of Ergal, the reference aerospace aluminium in competitive slot racing. Designed for a 2 mm axle, it combines low weight with dimensional precision that makes a difference on track.

Ergal

Removable pinion 10d 6.5mm with screw

Fabricante: Scaleauto

Ref: SC-1070e65

€6.32

Removable 10-tooth pinion with a 6.5 mm pitch from Scaleauto, with a fixing screw included. A basic transmission component to fine-tune the ratio of your slot car with precision and ease of change.

Bronze

14 Brass Pinion ø7.5mm for 2mm Shaft.

Fabricante: Scaleauto

Ref: SC-1097A75

€2.95

14-tooth brass pinion with an outer diameter of 7.5 mm, designed for 2 mm axles. A reliable transmission piece to adjust the gear ratio of your slot car with the precision required for competition or club fun.

Ergal

13d pinion Ergal ø7.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1096E75

€4.70

13-tooth pinion made of Ergal, with a diameter of 7.5 mm and compatible with 2 mm axles. A lightweight and precise piece from Scaleauto designed to fine-tune the transmission and maximise performance on track.

Bronze

14 Brass Pinion ø7.0mm for 2mm Shaft.

Fabricante: Scaleauto

Ref: SC-1097A70

€2.95

14-tooth brass pinion with an outer diameter of 7.0 mm, designed for 2 mm axles. A reliable transmission piece for those seeking accuracy in assembly and consistency in performance on the track.

Piñón 13d. Laton ø7,0mm para eje de 2mm.

Bronze

13d pinion. Brass ø7.0mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1096A70

€2.95

13-tooth pinion made of brass, with an outer diameter of 7.0 mm and a fitting for a 2 mm axle. A key component in the transmission of your slot car when you seek reliability, precise fit, and long lifespan in every running session.

Piñon no friction 11 d 5,5 mm Formula 22 EVO 3

In Stock

Bronze

Non-friction pinion 11 d 5.5 mm Formula 22 EVO 3

Fabricante: NSR

Ref: NSR6711EVO3

€6.35

11-tooth No Friction pinion with a pitch of 5.5 mm specifically designed for the NSR Formula 22 EVO 3 chassis. It reduces friction in the transmission to achieve a more agile response, cleaner acceleration, and improved track performance.

Piñones inline Baja friccion 11 Dientes (x2) EVO3

Bronze

Inline low friction pinions 11 Teeth (x2) EVO3

Fabricante: NSR

Ref: NSR7011EVO3

€6.35

Inline 11-tooth pinions in EVO3 version and low friction from NSR. The pack includes 2 units, designed to maximise longitudinal motor configurations with a smooth, efficient transmission and minimal energy loss.

Piñones inline Baja friccion 10 Dientes (x2) EVO3

Bronze

Inline pinions Low friction 10 Teeth (x2) EVO3

Fabricante: NSR

Ref: NSR7010EVO3

€6.35

Two low-friction inline EVO3 pinions with 10 teeth, designed by NSR for longitudinal competition setups. A small part with a direct impact on transmission efficiency and the car's smoothness on track.

Piñón 12d. Laton ø7,00mm para eje de 2mm

Bronze

12d brass pinion ø7.00mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1095A70

€2.95

12-tooth brass pinion with ø7.00 mm, designed for 2 mm axles. A transmission piece manufactured by Scaleauto with the precision required for competition in Sport track.

Piñón 11d. Ergal . ø6,5mm para eje de 2mm

Bronze

11t pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094E65

€4.70

11-tooth pinion made of Ergal, the aluminium alloy that makes a difference on the track. With an outer diameter of 6.5mm and a 2mm axle hole, it reduces rotational mass and improves the response of your transmission in slot racing competition.

Ergal

10-tooth Ergal pinion. ø6.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E60

€4.70

10-tooth pinion made of Ergal, with a diameter of 6.0 mm and designed for 2 mm axles. A key component in the transmission of your slot car when looking to reduce rotating mass and gain responsiveness in acceleration.

Ergal

10d pinion. Ergal. ø5.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E55

€4.70

Scaleauto 10-tooth pinion made of Ergal, with an outer diameter of 5.5 mm and designed for a 2 mm axle. Lightweight and durable for precise and efficient transmission in your slot car.

Bronze

8-tooth brass pinion ø5.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1091A55

€3.15

8-tooth brass pinion with an outer diameter of 5.5 mm, designed for 2 mm shafts. A precise replacement from Scaleauto to adjust the gear ratio and achieve maximum performance on track.

Showing 25-48 of 133 item(s)