Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

Ergal

12d pinion. Ergal. ø7mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1095E70

€4.70

12-tooth pinion made of Ergal, with an outer diameter of 7mm and designed for 2mm axles. A transmission piece from Scaleauto that combines low inertia and strength to deliver the best performance from your drive train.

Ergal

12d pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1095E65

€4.72

12-tooth pinion made of Ergal alloy, outer diameter 6.5 mm, designed for 2 mm axles. A lightweight and precise piece from Scaleauto to extract every tenth on track.

Ergal

10d pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E65

€4.70

10-tooth pinion made of Scaleauto Ergal alloy, with an outer diameter of 6.5 mm and a fitting for a 2 mm axle. Lightweight, durable, and manufactured with the precision required by the most demanding slot racing competitions.

Ergal

14d pinion. Ergal ø7.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1097E75

€4.72

14-tooth pinion made of Ergal, with a diameter of 7.5 mm and designed for 2 mm axles. A precision piece from Scaleauto for slot transmissions that seek the perfect balance between lightness and strength.

Steel

10t pinion. Steel for 2mm axle ø5.5mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1130b55

€3.80

Scaleauto steel pinion with 10 teeth (SC-1130b55) designed for 2 mm axles, with an outer diameter of 5.5 mm and a width of 2.5 mm. A reliable transmission piece to keep your slot car's setup at its best.

Ergal

13d pinion. Ergal 7.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1096E70

€4.70

13-tooth pinion made of Ergal, with a diameter of 7.0 mm and designed for a 2 mm axle. The combination of low weight and high stiffness makes it a highly valued option in competition setups and demanding preparations from Scaleauto.

Ergal

Removable Pinion 12d. M50 ø6.5mm in Ergal

Fabricante: Scaleauto

Ref: SC-1072E65

€6.32

Removable 12-tooth pinion, module 50 and diameter 6.5 mm made of Ergal, designed for 2 mm axles and secured with an M2.5 mm screw. Lightweight and strength where it is most needed on track.

Piñón Extraíble 12d. M50 ø7,5mm en Latón

Bronze

Removable Pinion 12d. M50 ø7.5mm in Brass

Fabricante: Scaleauto

Ref: SC-1072a75

€6.32

Removable brass pinion with 12 teeth, module 50 and diameter of 7.5 mm, designed for a 2 mm shaft and secured with an M2.5 mm screw. A reliable and easy-to-replace transmission component for fine-tuning the gear ratio of your slot car.

Piñón de 11d 6,5mm extraible con tornillo ergal

Bronze

Removable Pinion 11d. M50 ø6.5mm ergal

Fabricante: Scaleauto

Ref: SC-1071E65

€6.32

Removable 11-tooth pinion, module 50 and outer diameter of 6.5 mm made of ergal, designed for a 2 mm shaft with fixation via M2.5 mm screw. Lightweight and precise for those who fine-tune every detail of the track transmission.

SC-1095A67 - Piñón 12d. Laton ø6,75mm para eje de 2mm

Bronze

SC-1095A67 - 12t brass pinion ø6.75mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1095A67

€2.95

12-tooth brass pinion manufactured by Scaleauto, with an outer diameter of ø6.75 mm and a fit for a 2 mm axle. Equivalent to the SI-PI6712O, it ensures precise engagement and reliable transmission in your slot car setups.

SC-1094A67 - Piñón 11d. Laton ø6,75mm para eje de 2mm

Bronze

SC-1094A67 - 11t pinion brass ø6.75mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A67

€2.95

11-tooth brass pinion with a diameter of 6.75 mm and for a 2 mm shaft from Scaleauto, equivalent to the SI-PI6711O. A key component to maintain a clean, precise, and reliable transmission in your slot car setup.

SC-1094A65 - Piñón 11d. Laton ø6,5mm para eje de 2mm

Bronze

SC-1094A65 - 11t pinion. Brass ø6.5mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1094A65

€2.95

11-tooth brass pinion manufactured by Scaleauto, with an outer diameter of 6.5 mm and designed for a 2 mm axle. Equivalent to the SI-PS11, it is a reliable and precise transmission component to keep your slot car's mechanics in top condition.

SC-1094A60 - Piñón 11d. Laton ø6,0mm para eje de 2mm

Bronze

SC-1094A60 - 11t pinion brass ø6.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A60

€2.95

11-tooth brass pinion with an outer diameter of 6.0 mm, designed for 2 mm axles. Equivalent to the SI-PI6011O from Slot.it, it is a precision transmission component ideal for tuning and adjustments of the drivetrain in slot cars.

Bronze

SC-1094A55 - 11t pinion. Brass ø5.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A55

€2.95

11-tooth brass pinion with an outer diameter of 5.5 mm, designed for 2 mm axles. Manufactured by Scaleauto and equivalent to the SI-PI11, it is the transmission part you need to keep your chassis in top condition.

SC-1093A65 Piñón 10d. Laton ø6,5mm para eje de 2mm. equivalente SI-PS10

Bronze

SC-1093A65 - 10t brass pinion ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093A65

€2.95

10-tooth brass pinion manufactured by Scaleauto, with an outer diameter of 6.5 mm and a fitting for a 2 mm axle. Equivalent to the SI-PS10, designed to maintain a clean and precise transmission in your slot car setup.

Piñón 10d. Laton ø6,0mm para eje de 2mm.

Bronze

SC-1093A60 - 10t brass pinion ø6.0mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1093A60

€2.95

10-tooth brass pinion with a diameter of 6.0 mm, designed for 2 mm axles. Manufactured by Scaleauto with the precision required for slot preparation, equivalent to the SI-PI6010O.

Piñón 15d. Acero para eje 2mm. ø8,0m x 2.5mm

Steel

15d pinion. Steel for 2mm axle. ø8.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1135b80

€3.88

15-tooth steel pinion for 2 mm axle manufactured by Scaleauto (ref. SC-1135b80). With an outer diameter of 8.0 mm and a width of 2.5 mm, it provides the precise fit required by any well-prepared slot transmission.

Piñón 13d. Acero para eje 2mm. ø7,0mm x 2.5mm

Steel

13d pinion. Steel for 2mm axle. ø7.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1133b70

€3.88

Scaleauto steel pinion with 13 teeth for a 2 mm axle, with an outer diameter of 7.0 mm and a width of 2.5 mm. A key component for adjusting the transmission of your slot car with guarantees of precision and durability.

Piñón 12d. Acero para eje 2mm. ø6,5mm x 2.5mm

Steel

12t pinion. Steel for 2mm axle. ø6.5mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1132b65

€3.88

Scaleauto steel pinion with 12 teeth (ref. SC-1132B65) designed for a 2 mm axle, with an outer diameter of 6.5 mm and a width of 2.5 mm. A reliable and precise transmission component to keep your slot car in top condition during any practice session or club competition.

Piñón 11d. Acero para eje 2mm. ø6,0mm x 2.5mm

Steel

11t pinion. Steel for 2mm axle. ø6.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1131b

€3.80

Scaleauto steel pinion with 11 teeth specifically designed for 2 mm axles, with an outer diameter of 6.0 mm and a width of 2.5 mm. A reliable and precise transmission component to keep your slot car in top condition.

Piñón 9d. M50 acero para eje 2mm ø5,0mm x 2.5mm

Steel

9d pinion M50 steel for 2mm axle ø5.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1129b

€3.80

Scaleauto SC-1129b steel pinion with 9 teeth and module 50, designed for a 2 mm axle. With an outer diameter of 5.0 mm and 2.5 mm in width, it provides precise and durable transmission for any competition slot car setup or regular club use.

1/32 spare parts

Pressure pinion Ø 7 x Z13 STEEL

Fabricante: Sloting Plus

Ref: SP084213

€6.00

Pressure pinion in steel from Sloting Plus, with an outer diameter of 7 mm and 13 teeth, designed for offset chassis between 0.5 and 1 mm. It inserts directly onto 2 mm axles and expands the possibilities of combination with different crown gears to fine-tune the gear ratio to your specifications.

Steel

Pressure pinion Ø 7 x Z12 STEEL

Fabricante: Sloting Plus

Ref: SP084212

€6.00

Sloting Plus steel press-fit pinion with an outer diameter of 7 mm and 12 teeth, designed for offset mounts between 0.5 and 1 mm from any brand. It press-fits onto 2 mm motor shafts and expands the available gear combinations with different crown gears.

Bronze

Pressure pinion Ø 7 x Z13 BRASS

Fabricante: Sloting Plus

Ref: SP084113

€5.44

Brass pressure pinion from Sloting Plus with an outer diameter of 7 mm and 13 teeth, designed for offset mounts between 0.5 and 1 mm of any brand. It fits directly onto a 2 mm motor shaft, expanding your transmission combinations with different crown gears.

Showing 49-72 of 106 item(s)