Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

Ergal

10d pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E65

€4.70

10-tooth pinion made of Scaleauto Ergal alloy, with an outer diameter of 6.5 mm and a fitting for a 2 mm axle. Lightweight, durable, and manufactured with the precision required by the most demanding slot racing competitions.

Ergal

14d pinion. Ergal ø7.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1097E75

€4.72

14-tooth pinion made of Ergal, with a diameter of 7.5 mm and designed for 2 mm axles. A precision piece from Scaleauto for slot transmissions that seek the perfect balance between lightness and strength.

Out-of-Stock

Ergal

14d pinion. Ergal 7.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1097E70

€4.72

14-tooth pinion made of Ergal, with a diameter of 7.0 mm and for a 2 mm axle, from Scaleauto. Lightweight, durable and equivalent to the SI-PI7014E: a solid reference for any setup that demands precision in the transmission.

View

Steel

10t pinion. Steel for 2mm axle ø5.5mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1130b55

€3.80

Scaleauto steel pinion with 10 teeth (SC-1130b55) designed for 2 mm axles, with an outer diameter of 5.5 mm and a width of 2.5 mm. A reliable transmission piece to keep your slot car's setup at its best.

Ergal

13d pinion. Ergal 7.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1096E70

€4.70

13-tooth pinion made of Ergal, with a diameter of 7.0 mm and designed for a 2 mm axle. The combination of low weight and high stiffness makes it a highly valued option in competition setups and demanding preparations from Scaleauto.

Piñón Extraíble 13d. M50 ø7,5mm en Latón

Out-of-Stock

Bronze

Removable Pinion 13d. M50 ø7.5mm in Brass

Fabricante: Scaleauto

Ref: SC-1073A75

€6.32

Removable 13-tooth pinion, module 50 and diameter 7.5mm made of brass, designed for a 2mm shaft with fixation using an M2.5mm screw. A reliable and precise transmission piece to adjust the gear ratio of your slot car.

View

Ergal

Removable Pinion 12d. M50 ø6.5mm in Ergal

Fabricante: Scaleauto

Ref: SC-1072E65

€6.32

Removable 12-tooth pinion, module 50 and diameter 6.5 mm made of Ergal, designed for 2 mm axles and secured with an M2.5 mm screw. Lightweight and strength where it is most needed on track.

Piñón Extraíble 12d. M50 ø7,5mm en Latón

Bronze

Removable Pinion 12d. M50 ø7.5mm in Brass

Fabricante: Scaleauto

Ref: SC-1072a75

€6.32

Removable brass pinion with 12 teeth, module 50 and diameter of 7.5 mm, designed for a 2 mm shaft and secured with an M2.5 mm screw. A reliable and easy-to-replace transmission component for fine-tuning the gear ratio of your slot car.

Piñón de 11d 6,5mm extraible con tornillo ergal

Bronze

Removable Pinion 11d. M50 ø6.5mm ergal

Fabricante: Scaleauto

Ref: SC-1071E65

€6.32

Removable 11-tooth pinion, module 50 and outer diameter of 6.5 mm made of ergal, designed for a 2 mm shaft with fixation via M2.5 mm screw. Lightweight and precise for those who fine-tune every detail of the track transmission.

Nylon

10-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC006

€1.47

10-tooth pinion made of nylon from the reference M-PC006 by Mustang. A key component in the transmission of your slot car: lightweight, quiet, and effective for keeping the powertrain in top condition.

Nylon

9-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC005

€1.47

9-tooth pinion made of nylon from the brand Mustang, reference M-PC005. A direct replacement to keep the drivetrain of your slot car in perfect working condition.

Nylon

8-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC004

€1.47

8-tooth pinion made of nylon from the brand Mustang (ref. M-PC004). A simple and reliable transmission spare part to keep your slot car's chassis in perfect condition.

Bronze

10-tooth pinion 6mm in diameter

Fabricante: Tectime

Ref: M-PC003

€2.40

Long 10-tooth pinion with a diameter of 6 mm, specifically designed for anglewinder configuration motors. Ideal for rally and speed disciplines where precise transmission makes the difference.

Bronze

9-tooth pinion 5.4mm in diameter

Fabricante: Tectime

Ref: M-PC002

€2.40

9-tooth pinion with a diameter of 5.4 mm, designed for motors in anglewinder configuration and specifically intended for rally cars. Its elongated design facilitates fine adjustment with the crown gear, regardless of how much it protrudes.

Bronze

8-tooth pinion 5mm diameter LONG 1

Fabricante: Tectime

Ref: M-PC001

€2.40

8-tooth pinion with a 5 mm diameter shaft in LONG 1 version, designed for motors in anglewinder configuration. Its greater length facilitates adjustment with the crown gear regardless of its protrusion, ideal for competition setups in the rally category.

Nylon

5 x Nylon pinion 10t

Fabricante: Tectime

Ref: TT452

€1.47

Pack of 5 nylon pinions with 10 teeth from the brand Tectime (ref. TT452). A reliable option to renew or prepare the transmission of your slot car with smoothness and quiet operation.

Nylon

5 x Nylon pinion 9t

Fabricante: Tectime

Ref: TT451

€1.47

Pack of 5 nylon 9-tooth pinions Tectime (ref. TT451) for slot transmissions. A silent and durable solution for those seeking reliability in every assembly.

Nylon

5 x Nylon pinion 8t

Fabricante: Tectime

Ref: TT450

€1.47

Pack of 5 nylon 8-tooth pinions from Tectime, reference TT450. Designed to provide a smooth, quiet, and durable transmission in your slot car setups.

Piñón 13d. Laton ø6,5mm para eje de 2mm.

Out-of-Stock

Bronze

13d pinion. Brass ø6.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1096A65

€2.95

13-tooth pinion made of brass, with an outer diameter of 6.5 mm and a 2 mm axle hole. A reliable and precise transmission component to keep your slot car in top condition.

View

SC-1095A67 - Piñón 12d. Laton ø6,75mm para eje de 2mm

Bronze

SC-1095A67 - 12t brass pinion ø6.75mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1095A67

€2.95

12-tooth brass pinion manufactured by Scaleauto, with an outer diameter of ø6.75 mm and a fit for a 2 mm axle. Equivalent to the SI-PI6712O, it ensures precise engagement and reliable transmission in your slot car setups.

SC-1094A67 - Piñón 11d. Laton ø6,75mm para eje de 2mm

Bronze

SC-1094A67 - 11t pinion brass ø6.75mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A67

€2.95

11-tooth brass pinion with a diameter of 6.75 mm and for a 2 mm shaft from Scaleauto, equivalent to the SI-PI6711O. A key component to maintain a clean, precise, and reliable transmission in your slot car setup.

SC-1094A65 - Piñón 11d. Laton ø6,5mm para eje de 2mm

Bronze

SC-1094A65 - 11t pinion. Brass ø6.5mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1094A65

€2.95

11-tooth brass pinion manufactured by Scaleauto, with an outer diameter of 6.5 mm and designed for a 2 mm axle. Equivalent to the SI-PS11, it is a reliable and precise transmission component to keep your slot car's mechanics in top condition.

SC-1094A60 - Piñón 11d. Laton ø6,0mm para eje de 2mm

Bronze

SC-1094A60 - 11t pinion brass ø6.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A60

€2.95

11-tooth brass pinion with an outer diameter of 6.0 mm, designed for 2 mm axles. Equivalent to the SI-PI6011O from Slot.it, it is a precision transmission component ideal for tuning and adjustments of the drivetrain in slot cars.

Bronze

SC-1094A55 - 11t pinion. Brass ø5.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094A55

€2.95

11-tooth brass pinion with an outer diameter of 5.5 mm, designed for 2 mm axles. Manufactured by Scaleauto and equivalent to the SI-PI11, it is the transmission part you need to keep your chassis in top condition.

Showing 49-72 of 118 item(s)