Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

Piñones inline Baja friccion 10 Dientes (x2) EVO3

Bronze

Inline pinions Low friction 10 Teeth (x2) EVO3

Fabricante: NSR

Ref: NSR7010EVO3

€6.35

Two low-friction inline EVO3 pinions with 10 teeth, designed by NSR for longitudinal competition setups. A small part with a direct impact on transmission efficiency and the car's smoothness on track.

Piñón 12d. Laton ø7,00mm para eje de 2mm

Bronze

12d brass pinion ø7.00mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1095A70

€2.95

12-tooth brass pinion with ø7.00 mm, designed for 2 mm axles. A transmission piece manufactured by Scaleauto with the precision required for competition in Sport track.

Piñón 11d. Ergal . ø6,5mm para eje de 2mm

Bronze

11t pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1094E65

€4.70

11-tooth pinion made of Ergal, the aluminium alloy that makes a difference on the track. With an outer diameter of 6.5mm and a 2mm axle hole, it reduces rotational mass and improves the response of your transmission in slot racing competition.

Ergal

10-tooth Ergal pinion. ø6.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E60

€4.70

10-tooth pinion made of Ergal, with a diameter of 6.0 mm and designed for 2 mm axles. A key component in the transmission of your slot car when looking to reduce rotating mass and gain responsiveness in acceleration.

Ergal

10d pinion. Ergal. ø5.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E55

€4.70

Scaleauto 10-tooth pinion made of Ergal, with an outer diameter of 5.5 mm and designed for a 2 mm axle. Lightweight and durable for precise and efficient transmission in your slot car.

Bronze

8-tooth brass pinion ø5.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1091A55

€3.15

8-tooth brass pinion with an outer diameter of 5.5 mm, designed for 2 mm shafts. A precise replacement from Scaleauto to adjust the gear ratio and achieve maximum performance on track.

Nylon

8d pinion M50 polyamide for 1.5mm axle

Fabricante: Scaleauto

Ref: SC-1291

€3.02

8-tooth pinion, module 50, made of polyamide and designed for a 1.5 mm shaft. A key component of the transmission in slot cars that seeks lightness, gear precision, and durability on track. Reference Scaleauto SC-1291.

Nylon

15d Pinion M50 Polyamide (4 units)

Fabricante: Scaleauto

Ref: SC-1015

€2.00

Four 15-tooth module 50 pinions made of polyamide by Scaleauto. Transmission parts designed to maintain the precision of the running gear on Sport track and for those who prepare their cars with real competition demands.

Ergal

12d pinion. Ergal. ø7mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1095E70

€4.70

12-tooth pinion made of Ergal, with an outer diameter of 7mm and designed for 2mm axles. A transmission piece from Scaleauto that combines low inertia and strength to deliver the best performance from your drive train.

Ergal

12d pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1095E65

€4.72

12-tooth pinion made of Ergal alloy, outer diameter 6.5 mm, designed for 2 mm axles. A lightweight and precise piece from Scaleauto to extract every tenth on track.

Ergal

10d pinion. Ergal. ø6.5mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1093E65

€4.70

10-tooth pinion made of Scaleauto Ergal alloy, with an outer diameter of 6.5 mm and a fitting for a 2 mm axle. Lightweight, durable, and manufactured with the precision required by the most demanding slot racing competitions.

Ergal

14d pinion. Ergal ø7.5mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1097E75

€4.72

14-tooth pinion made of Ergal, with a diameter of 7.5 mm and designed for 2 mm axles. A precision piece from Scaleauto for slot transmissions that seek the perfect balance between lightness and strength.

Out-of-Stock

Ergal

14d pinion. Ergal 7.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1097E70

€4.72

14-tooth pinion made of Ergal, with a diameter of 7.0 mm and for a 2 mm axle, from Scaleauto. Lightweight, durable and equivalent to the SI-PI7014E: a solid reference for any setup that demands precision in the transmission.

View

Steel

10t pinion. Steel for 2mm axle ø5.5mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1130b55

€3.80

Scaleauto steel pinion with 10 teeth (SC-1130b55) designed for 2 mm axles, with an outer diameter of 5.5 mm and a width of 2.5 mm. A reliable transmission piece to keep your slot car's setup at its best.

Ergal

13d pinion. Ergal 7.0mm for 2mm axle

Fabricante: Scaleauto

Ref: SC-1096E70

€4.70

13-tooth pinion made of Ergal, with a diameter of 7.0 mm and designed for a 2 mm axle. The combination of low weight and high stiffness makes it a highly valued option in competition setups and demanding preparations from Scaleauto.

Piñón Extraíble 13d. M50 ø7,5mm en Latón

Out-of-Stock

Bronze

Removable Pinion 13d. M50 ø7.5mm in Brass

Fabricante: Scaleauto

Ref: SC-1073A75

€6.32

Removable 13-tooth pinion, module 50 and diameter 7.5mm made of brass, designed for a 2mm shaft with fixation using an M2.5mm screw. A reliable and precise transmission piece to adjust the gear ratio of your slot car.

View

Ergal

Removable Pinion 12d. M50 ø6.5mm in Ergal

Fabricante: Scaleauto

Ref: SC-1072E65

€6.32

Removable 12-tooth pinion, module 50 and diameter 6.5 mm made of Ergal, designed for 2 mm axles and secured with an M2.5 mm screw. Lightweight and strength where it is most needed on track.

Piñón Extraíble 12d. M50 ø7,5mm en Latón

Bronze

Removable Pinion 12d. M50 ø7.5mm in Brass

Fabricante: Scaleauto

Ref: SC-1072a75

€6.32

Removable brass pinion with 12 teeth, module 50 and diameter of 7.5 mm, designed for a 2 mm shaft and secured with an M2.5 mm screw. A reliable and easy-to-replace transmission component for fine-tuning the gear ratio of your slot car.

Piñón de 11d 6,5mm extraible con tornillo ergal

Bronze

Removable Pinion 11d. M50 ø6.5mm ergal

Fabricante: Scaleauto

Ref: SC-1071E65

€6.32

Removable 11-tooth pinion, module 50 and outer diameter of 6.5 mm made of ergal, designed for a 2 mm shaft with fixation via M2.5 mm screw. Lightweight and precise for those who fine-tune every detail of the track transmission.

Piñon no friction 9d 5,5 mm Formula 22 NSR

In Stock

Bronze

11d no friction pinion 5.5mm Formula 22

Fabricante: NSR

Ref: NSR6711

€4.91

The NSR No Friction 11-tooth pinion with a pitch of 5.5 mm (ref. NSR6711) is designed to minimise friction in the transmission of your Formula 22 cars, transferring more power to the axle and improving response in every corner.

Bronze

Non-friction pinion 9d 5.5 mm Formula 22 NSR

Fabricante: NSR

Ref: NSR6709

€4.91

NSR No Friction 9-tooth pinion with a 5.5 mm pitch specifically designed for the Formula 22 line. Designed to minimise friction in the transmission and maximise performance on every lap.

Nylon

10-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC006

€1.47

10-tooth pinion made of nylon from the reference M-PC006 by Mustang. A key component in the transmission of your slot car: lightweight, quiet, and effective for keeping the powertrain in top condition.

Nylon

9-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC005

€1.47

9-tooth pinion made of nylon from the brand Mustang, reference M-PC005. A direct replacement to keep the drivetrain of your slot car in perfect working condition.

Nylon

8-tooth nylon pinion

Fabricante: Tectime

Ref: M-PC004

€1.47

8-tooth pinion made of nylon from the brand Mustang (ref. M-PC004). A simple and reliable transmission spare part to keep your slot car's chassis in perfect condition.

Showing 49-72 of 148 item(s)