Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

Piñón 10d. Laton ø6,0mm para eje de 2mm.

Bronze

SC-1093A60 - 10t brass pinion ø6.0mm for 2mm axle.

Fabricante: Scaleauto

Ref: SC-1093A60

€2.95

10-tooth brass pinion with a diameter of 6.0 mm, designed for 2 mm axles. Manufactured by Scaleauto with the precision required for slot preparation, equivalent to the SI-PI6010O.

Piñón 15d. Acero para eje 2mm. ø8,0m x 2.5mm

Steel

15d pinion. Steel for 2mm axle. ø8.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1135b80

€3.88

15-tooth steel pinion for 2 mm axle manufactured by Scaleauto (ref. SC-1135b80). With an outer diameter of 8.0 mm and a width of 2.5 mm, it provides the precise fit required by any well-prepared slot transmission.

Piñón 13d. Acero para eje 2mm. ø7,0mm x 2.5mm

Steel

13d pinion. Steel for 2mm axle. ø7.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1133b70

€3.88

Scaleauto steel pinion with 13 teeth for a 2 mm axle, with an outer diameter of 7.0 mm and a width of 2.5 mm. A key component for adjusting the transmission of your slot car with guarantees of precision and durability.

Piñón 12d. Acero para eje 2mm. ø6,5mm x 2.5mm

Steel

12t pinion. Steel for 2mm axle. ø6.5mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1132b65

€3.88

Scaleauto steel pinion with 12 teeth (ref. SC-1132B65) designed for a 2 mm axle, with an outer diameter of 6.5 mm and a width of 2.5 mm. A reliable and precise transmission component to keep your slot car in top condition during any practice session or club competition.

Piñón 11d. Acero para eje 2mm. ø6,0mm x 2.5mm

Steel

11t pinion. Steel for 2mm axle. ø6.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1131b

€3.80

Scaleauto steel pinion with 11 teeth specifically designed for 2 mm axles, with an outer diameter of 6.0 mm and a width of 2.5 mm. A reliable and precise transmission component to keep your slot car in top condition.

Piñón 9d. M50 acero para eje 2mm ø5,0mm x 2.5mm

Steel

9d pinion M50 steel for 2mm axle ø5.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1129b

€3.80

Scaleauto SC-1129b steel pinion with 9 teeth and module 50, designed for a 2 mm axle. With an outer diameter of 5.0 mm and 2.5 mm in width, it provides precise and durable transmission for any competition slot car setup or regular club use.

1/32 spare parts

Pressure pinion Ø 7 x Z13 STEEL

Fabricante: Sloting Plus

Ref: SP084213

€6.00

Pressure pinion in steel from Sloting Plus, with an outer diameter of 7 mm and 13 teeth, designed for offset chassis between 0.5 and 1 mm. It inserts directly onto 2 mm axles and expands the possibilities of combination with different crown gears to fine-tune the gear ratio to your specifications.

Steel

Pressure pinion Ø 7 x Z12 STEEL

Fabricante: Sloting Plus

Ref: SP084212

€6.00

Sloting Plus steel press-fit pinion with an outer diameter of 7 mm and 12 teeth, designed for offset mounts between 0.5 and 1 mm from any brand. It press-fits onto 2 mm motor shafts and expands the available gear combinations with different crown gears.

Bronze

Pressure pinion Ø 7 x Z13 BRASS

Fabricante: Sloting Plus

Ref: SP084113

€5.44

Brass pressure pinion from Sloting Plus with an outer diameter of 7 mm and 13 teeth, designed for offset mounts between 0.5 and 1 mm of any brand. It fits directly onto a 2 mm motor shaft, expanding your transmission combinations with different crown gears.

Bronze

Pressure pinion Ø 7 x Z12 BRASS

Fabricante: Sloting Plus

Ref: SP084112

€5.44

Brass pressure pinion with an outer diameter of 7 mm and 12 teeth, manufactured by Sloting Plus for offset mounts between 0.5 and 1 mm. Compatible with a 2 mm motor shaft, it expands the gear ratio combinations with different crown gears. Ref. SP084112.

Ergal

SP084013 - Aluminium Pressure Pinion Z13 Ø 7 x2

Fabricante: Sloting Plus

Ref: SP084013

€5.44

Aluminium pressure pinion with 13 teeth and an outer diameter of 7 mm, designed for offset mounts of 0.5 to 1 mm. For a motor shaft with a diameter of 2 mm. Pack of 2 units from Sloting Plus.

Ergal

Pressure pinion Ø 7 x Z12 DURALUMINIUM

Fabricante: Sloting Plus

Ref: SP084012

€5.44

Pressure pinion in duraluminium of Ø7 mm and 12 teeth, designed for offset mounts of 0.5 to 1 mm from any brand. Compatible with a 2 mm diameter motor shaft, it expands the combinations with crown gears of different sizes.

Out-of-Stock

Nylon

Nylon pinion z9 FINE

Fabricante: Sloting Plus

Ref: SP083009

€1.80

Nylon pinion Z9 in Fine version (SP083009): narrower teeth than in the standard Z9 model, which smooths power delivery and braking. Blue colour, bag with 4 units, for 2 mm axles.

View

Nylon

Nylon pinion z11

Fabricante: Sloting Plus

Ref: SP082911

€2.15

Yellow nylon Z11 pinion, with an outer diameter of 6.5 mm and a length of 5 mm, designed for press-fitting onto 2 mm axles. Sold in a pack of 4 units, ready to replace the usual wear of this component in the transmission.

Nylon

10d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1010

€2.00

10-tooth pinion with a module of 50 made from high-durability nylon, designed for motors with a standard 2 mm shaft. Pack of 4 units from the Scaleauto transmission range (SC-1010).

In Stock

Nylon

7t nylon pinion (4 pcs)

Fabricante: MITOOS

Ref: CXM207

€1.90

Four nylon pinions with 7 teeth, module 0.5 mm and an outer diameter of 4.5 mm. They fit snugly onto 2 mm axles and are distinguished by their characteristic turquoise blue colour, ideal for quick identification in the workshop.

SC-1193 Piñón 9d. M50 Latón para Eje 2mm O 6.35mm de Scaleauto

Bronze

10z M50 Bronze Pinion 6.35mm

Fabricante: Scaleauto

Ref: SC-1193

€2.63

10-tooth bronze pinion with a module of 50 from Scaleauto (SC-1193), suitable for 2 mm or 6.35 mm axles. A reliable transmission component to keep your slot car in top condition and achieve maximum performance in every session.

Out-of-Stock

Ergal

11t pinion M50 Ergal

Fabricante: Scaleauto

Ref: SC-1031

€3.57

11-tooth pinion with a 50 module made from high-durability Ergal, designed for a standard 2 mm axle. A reliable and lightweight transmission piece to keep your slot car in top condition for every session.

View

Out-of-Stock

Ergal

9d Pinion M50 Ergal

Fabricante: Scaleauto

Ref: SC-1029

€3.64

9-tooth pinion with a module of 50 made from high-durability Ergal, designed for a standard 2 mm axle. A lightweight and robust transmission component, intended for those who fine-tune the traction system of their slot cars. Supplied in 1 unit.

View

Nylon

14d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1014

€2.00

Four 14-tooth pinions, Module 50, made from high-durability Nylon for motors with a standard 2 mm shaft. A reliable and precise solution from Scaleauto to keep the transmission at its optimal point.

Nylon

13d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1013

€2.00

13-tooth pinion and Module 50 made of high-durability nylon, designed for motors with a standard 2 mm shaft. Packaged in a set of 4 units, it is a reliable option to keep your slot car's transmission in top condition.

Nylon

12d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1012

€1.88

12-tooth pinion and Module 50 made of high-durability nylon, designed for standard 2 mm shafts. Pack of 4 units from Scaleauto, ready to prepare or replace the transmission of your slot car with precision and reliability.

Nylon

11t Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1011

€2.00

11-tooth pinion and Module 50 made from high-durability Nylon, designed for standard 2 mm axles. Compatible with the transmission of slot cars that use M50 crown gear. Supplied in a pack of 4 units.

Nylon

9d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1009

€1.94

9-tooth pinion with a 50 module made of high-durability nylon, compatible with standard 2 mm axles. It comes in a pack of 4 units, ideal for preparation and replacement in competition slot car assemblies.

Showing 73-96 of 134 item(s)