Pinions

We select each pinion for its machining precision and real compatibility with the most commonly used motors and crown gears in competition. If you have questions about which gear ratio suits you best, you will find the answer here.

All products in Pinions

SC-1011 - Piñón 11d. M50 Nylon (4 unidades) Scaleauto
Last items in stock
Nylon

11t Pinion M50 Nylon

Fabricante: Scaleauto
Ref: SC-1011
€2.00
11-tooth pinion and Module 50 made from high-durability Nylon, designed for standard 2 mm axles. Compatible with the transmission of slot cars that use M50 crown gear. Supplied in a pack of 4 units.
SWPN12T6 - 2x Piñon 12d. Extralight 6.5mm AW & SW de Sideways
Last items in stock
Bronze

12z Extralight 6.5mm AW & SW

Fabricante: Sideways
Ref: SWPN12T65
€5.28
Two Sideways 12-tooth Extralight pinions of 6.5 mm, compatible with Anglewinder and Sidewinder mounts. Minimum weight, maximum precision, and direct transmission to get the best performance from your motor on every metre of track.
SWPN11T6 - 2x Piñon 11d. Extralight 6.5mm AW & SW de Sideways
Bronze

11z Extralight 6.5mm AW & SW

Fabricante: Sideways
Ref: SWPN11T65
€5.28
Two Sideways pinions with 11 teeth and 6.5mm width, in Extralight version, compatible with Anglewinder and Sidewinder configurations. A direct and reliable option to fine-tune the transmission of your slot car.
SWPN10T6 - 2x Piñon 10d. Extralight 6.5mm AW & SW de Sideways
Bronze

10z Extralight 6.5mm AW & SW

Fabricante: Sideways
Ref: SWPN10T65
€5.28
Sideways Extralight 10-tooth pinion with a diameter of 6.5 mm, designed for Anglewinder and Sidewinder setups. Reduced rolling weight and precise transmission to gain tenths where it matters most.
SC-1009 - Piñón 9d. M50 Nylon (4 unidades) Scaleauto
Nylon

9d Pinion M50 Nylon

Fabricante: Scaleauto
Ref: SC-1009
€1.94
9-tooth pinion with a 50 module made of high-durability nylon, compatible with standard 2 mm axles. It comes in a pack of 4 units, ideal for preparation and replacement in competition slot car assemblies.
SC-1008 - Piñón 8d. M50 Nylon (4 unidades)
Nylon

8t pinion. M50 Nylon

Fabricante: Scaleauto
Ref: SC-1008
€1.94
8-tooth pinion in module 50 made of high-durability nylon, designed for motors with a standard 2 mm shaft. Packaged in a set of 4 units, it is a key component in the transmission of any Scaleauto slot car setup.
Piñon extraible laton z13 7,5mm M2,5
Last items in stock
Steel

Removable brass pinion z13 7.5mm M2.5

Fabricante: Sloting Plus
Ref: SP085813
€7.20
Removable brass pinion with 13 teeth and a pitch of 7.5 mm, designed for 2 mm motor shafts with fixation using M2.5 x 2.5 mm allen screws. The bag includes 1 pinion and 2 screws, everything needed for a clean and secure assembly.
Piñon extraible laton z12 7,5mm M2,5
Steel

Brass removable pinion z12 7.5mm M2.5

Fabricante: Sloting Plus
Ref: SP085812
€7.20
Removable brass pinion z12 with a pitch of 7.5 mm and M2.5 allen screw, designed for 2 mm motor shafts. Made of brass for precise and durable transmission. The bag includes 1 pinion and 2 spare screws.
Piñon extraible laton z13 7,5mm M2,5
Out-of-Stock
Bronze

Removable brass pinion z13 7.5mm M2.5

Fabricante: Sloting Plus
Ref: SP085713
€6.72
Removable brass pinion z13 with a pitch of 7.5 mm and M2.5 x 2.5 mm allen screw, designed for a 2 mm motor shaft. Made of brass and duralumin, it is supplied in a bag with 1 unit and 2 spare screws.
View
Piñon extraible laton z12 7,5mm M2,5
Last items in stock
Bronze

Removable brass pinion z12 7.5mm M2.5

Fabricante: Sloting Plus
Ref: SP085712
€6.72
Removable brass pinion z12 with a pitch of 7.5 mm, made of brass and duraluminium, designed for 2 mm motor shafts. Fixing via M2.5 x 2.5 mm allen screw. The bag includes 1 pinion and 2 spare screws.
Piñon extraible laton z12 6,5mm
Last items in stock
Bronze

Removable brass pinion z12 6.5mm

Fabricante: Sloting Plus
Ref: SP085112
€6.72
Removable brass pinion with 12 teeth and a shaft pitch of 6.5 mm, designed by Sloting Plus to precisely and reliably adjust and fine-tune the transmission of your slot car.
Corona sidewinder z30 amarilla Ø16,4
Nylon

Nylon pinion Z12 x 7mm

Fabricante: Sloting Plus
Ref: SP082912
€2.15
Green nylon Z12 pinion with a 7 mm outer diameter, presented in a pack of 4 units. A lightweight and silent transmission spare part, widely used in the preparation and tuning of competition and recreational slot cars.
Piñon nylon z10
Nylon

Nylon pinion z10

Fabricante: Sloting Plus
Ref: SP082910
€2.15
nylon pinion Z10 with a shaft diameter of 6 mm in purple, supplied in a pack of 4 units. A reliable and lightweight option for the transmission of your slot car.
Piñon nylon z8
Nylon

Nylon pinion z9

Fabricante: Sloting Plus
Ref: SP082909
€2.15
Z9 nylon pinion with a diameter of 5.5 mm in blue, presented in a pack of 4 units. A reference spare part for the transmission of your slot car, easy to identify thanks to its colour and ready to be mounted in your club or workshop setups.
Piñon nylon z8
Nylon

Nylon pinion z8

Fabricante: Sloting Plus
Ref: SP082908
€2.15
Z8 nylon pinion for 5 mm axle in striking orange colour, presented in a pack of 4 units. A lightweight and quiet option to keep your slot car's transmission in top condition.
Piñón 12z nylon (4 uds)
In Stock
Nylon

12z nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM212
€1.90
Pack of 4 nylon 12-tooth pinions, reference CXM212. A key consumable in the transmission of any slot car: lightweight, quiet, and easy to replace when wear begins to affect track performance.
Piñón 14z nylon (4 uds)
In Stock
Nylon

14t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM214
€1.90
Pack of 4 nylon 14-tooth pinions, ideal for slot car transmission. A crucial spare part to keep the mechanics in top condition and optimise the engagement with the crown gear.
Piñón 13z nylon (4 uds)
In Stock
Nylon

13t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM213
€1.90
Pack of 4 nylon pinions with 13 teeth manufactured by Mitoos (ref. CXM213). With a module of 0.5 mm, an outer diameter of 7.5 mm, and a length of 5 mm, they are press-fitted onto a 2 mm shaft. Coloured brown for easy identification.
Piñón 11z nylon (4 uds)
In Stock
Nylon

11t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM211
€1.90
Pack of 4 nylon 11-tooth pinions, a basic and reliable spare part to keep your slot car's transmission in top condition. Ref. CXM211.
Piñón 10z nylon (4 uds)
In Stock
Nylon

10t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM210
€1.90
Pack of 4 nylon 10-tooth pinions: a lightweight, quiet, and durable option to keep your slot car's transmission in top condition. Reference CXM210.
Piñón 9z nylon (4 uds)
In Stock
Nylon

9t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM209
€1.60
Pack of 4 nylon 9-tooth pinions designed to keep the drivetrain of your slot cars in top condition. Ideal as consumable spares or to adjust the gear ratio according to the track.
Piñón 8z nylon (4 uds)
In Stock
Nylon

8t nylon pinion (4 pcs)

Fabricante: MITOOS
Ref: CXM208
€1.60
Pack of 4 8-tooth pinions made of nylon, reference CXM208. A lightweight and silent solution to keep the drivetrain of your slot car in perfect running condition.
Showing 97-118 of 118 item(s)
Pinions
  • Nylon
  • Bronze
  • Steel
  • Ergal
Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.

Contáctanos por Whatsapp