Axles

We select each reference based on real technical criteria: diameter, material, surface finish, and tolerances that make a difference on the track. If you have any doubts about which axle fits your chassis, we help you get it right.

All products in Axles

Steel

47.5mm Steel axle x2

Fabricante: Sloting Plus

Ref: SP041047

€3.35

Tempered and calibrated stainless steel axle of 47.5 mm in length and 2.38 mm in diameter (3/32"). Bag with 2 units. Precision and rigidity for demanding slot car assemblies where the centring and uniformity of the axle make a difference on track.

Holes

51mm (X2) - Hollow Axle

Fabricante: SLOT.IT

Ref: SIPA01-51H

€4.17

Two hollow axles of 51 mm from Slot.it, reference SIPA01-51H. A basic component in any serious setup: less rotating mass, better response, and direct mounting on the brand's chassis.

Specials

Independent wheel axle

Fabricante: SLOT.IT

Ref: SIPA39

€4.56

Independent axle for Slot.it wheels (ref. SIPA39), designed for setups where each wheel must rotate autonomously. A key component for fine-tuning the transmission and cornering behaviour of your slot car.

Titanium

Titanium axle 2.35 x 57mm

Fabricante: Sloting Plus

Ref: SP042257

€6.15

Ground titanium, calibrated and with a titanium coating (≈8 μm), the SP042257 axle from Sloting Plus combines extreme lightness, great toughness, and a wear resistance far superior to that of conventional axles. 57 mm in length, 2.38 mm in diameter, 1.06 g. Bag with 1 unit.

Titanium

Titanium axle 2.35 x 55mm

Fabricante: Sloting Plus

Ref: SP042255

€6.15

Ground and calibrated titanium axle with an 8-micron titanium coating: lightweight, toughness, and a wear resistance far superior to conventional axles. 55 mm in length and 2.38 mm in diameter (3/32"). 1 unit per bag.

Steel

45mm steel axle

Fabricante: Sloting Plus

Ref: SP041045

€3.35

Tempered and calibrated stainless steel axle from Sloting Plus: 45 mm in length and 2.38 mm in diameter (3/32''). Pack of 2 units. A reliable reference for demanding track setups.

In Stock

Steel

Axle 50mm x2

Fabricante: MITOOS

Ref: CXM054

€3.50

Rear axle of 50 mm made from high-quality steel (diameter 2.38 mm), in a pack of 2 units. A basic and reliable component for the setup and tuning of your slot car.

Out-of-Stock

Steel

45mm Axle x2

Fabricante: MITOOS

Ref: CXM053

€2.27

Pack of 2 axles of 45 mm made from high-quality steel, with a diameter of 2.38 mm. A key component for the maintenance and preparation of your slot car with the precision demanded by competition.

View

Holes

50mm x 3/32 Hollow axle PRO

Fabricante: Scaleauto

Ref: SC-1201

€3.80

PRO Scaleauto steel axle (ref. SC-1201) of 50 mm x 3/32, drilled and weighing only 0.90 g. A benchmark option for those looking to reduce rotating mass and fine-tune performance on track without compromising the rigidity of the assembly.

Eje hueco con tratamiento de titanio 2,38 x 52,5mm

Holes

60mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042160

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns, 60 mm in length and 2.38 mm in diameter (3/32"). Greater resistance to wear and traction in competition. Bag with 1 unit, weight 1.27 g.

Holes

57.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042157

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, in a format of 57.5 mm x 2.38 mm (3/32''). Greater resistance to wear and traction for demanding competition. 1.23 g. Bag with 1 unit.

Holes

55mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042155

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, measuring 55 mm x 2.38 mm (3/32"). A preparation solution that combines lightness and high resistance to wear and traction for demanding assemblies.

Holes

52.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042152

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns. 52.5 mm in length, 2.38 mm in diameter (3/32''), 1.12 g. One unit per bag.

Titanium

Titanium axle 2.38 x 57.5 mm

Fabricante: Sloting Plus

Ref: SP041157

€5.20

Calibrated titanium axle of 57.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1.1 g. Its paramagnetic nature and the rough finish on the ends make it unmistakable compared to conventional steel axles. Bag with 1 unit.

Titanium

Titanium axle 2.38 x 55 mm

Fabricante: Sloting Plus

Ref: SP041155

€5.20

Calibrated titanium axle with a diameter of 2.38 mm (3/32") and a length of 55 mm, weighing only 1.05 g. Paramagnetic by nature, extremely lightweight and easy to identify thanks to the rough finish on its ends. Bag containing 1 unit.

Titanium

Titanium axle 2.38 x 52.5 mm

Fabricante: Sloting Plus

Ref: SP041152

€5.20

Titanium axle of 52.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1 g. Its paramagnetic nature and the rough finish at the ends make it unmistakable on the bench. Bag with 1 unit.

Steel

Stainless steel axle 2.38 (3/32") x 57.5 mm

Fabricante: Sloting Plus

Ref: SP041057

€3.35

Uncompromising mechanical precision: the SP041057 axle from Sloting Plus, made of tempered and calibrated stainless steel, ensures a constant diameter of 2.38 mm (3/32") along its entire length of 57.5 mm. Set of 2 units, designed for serious competition.

Specials

Self-centering axle steel 50mm

Fabricante: Sloting Plus

Ref: SP049996

€2.48

Self-centering axle made of tempered and calibrated stainless steel, 50 mm in length x 2.38 mm in diameter (3/32''). Supplied in a pack of 2 units, ready for direct installation in your slot car setups.

Holes

60mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042060

€4.40

Hollow stainless steel axle, 60 mm in length and 2.38 mm in diameter (3/32''), weighing 1.26 g. Pack of 2 units designed for the preparation and precise setup of slot cars.

Out-of-Stock

Holes

Hollow steel axle 3/32 (2.38) x 57.5 mm 2 units

Fabricante: Sloting Plus

Ref: SP042057

€4.40

Two hollow steel axles from Sloting Plus with a diameter of 3/32" (2.38 mm) and a length of 57.5 mm. Their hollow structure reduces inertial mass compared to a solid axle, resulting in a more responsive start, more effective braking, and perfectly centred transmission in any racing configuration.

View

Holes

Hollow steel axle 3/32 (2.38) x 55 mm 2 pcs

Fabricante: Sloting Plus

Ref: SP042055

€4.40

Set of 2 hollow stainless steel axles from Sloting Plus in size 3/32" (2.38 mm) x 55 mm, calibrated along their entire length to ensure perfectly concentric rotation and reduce rotational weight without sacrificing stiffness.

Holes

52.5mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042052

€4.40

Calibrated stainless steel axle of 52.5 mm in length and 2.38 mm in diameter (3/32"), weighing 1.1 g. Supplied in a bag with 2 units, ready for your slot preparation workshop.

Holes

50mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042050

€4.40

Calibrated stainless steel axle of 50 mm in length and 2.38 mm in diameter (3/32"), weighing 1.06 g. Pack of 2 units, ideal for precision setups in slot cars.

Steel

70mm steel axle

Fabricante: Sloting Plus

Ref: SP041070

€3.44

Tempered and calibrated stainless steel axle measuring 70 mm in length and 2.38 mm in diameter (3/32''), presented in a bag containing 2 units. A precision part for the preparation and tuning of slot cars.

Showing 25-48 of 66 item(s)