Axles

We select each reference based on real technical criteria: diameter, material, surface finish, and tolerances that make a difference on the track. If you have any doubts about which axle fits your chassis, we help you get it right.

All products in Axles

Holes

51mm (X2) - Hollow Axle

Fabricante: SLOT.IT

Ref: SIPA01-51H

€4.17

Two hollow axles of 51 mm from Slot.it, reference SIPA01-51H. A basic component in any serious setup: less rotating mass, better response, and direct mounting on the brand's chassis.

Specials

Independent wheel axle

Fabricante: SLOT.IT

Ref: SIPA39

€4.56

Independent axle for Slot.it wheels (ref. SIPA39), designed for setups where each wheel must rotate autonomously. A key component for fine-tuning the transmission and cornering behaviour of your slot car.

Titanium

Titanium axle 2.35 x 57mm

Fabricante: Sloting Plus

Ref: SP042257

€6.15

Ground titanium, calibrated and with a titanium coating (≈8 μm), the SP042257 axle from Sloting Plus combines extreme lightness, great toughness, and a wear resistance far superior to that of conventional axles. 57 mm in length, 2.38 mm in diameter, 1.06 g. Bag with 1 unit.

Titanium

Titanium axle 2.35 x 55mm

Fabricante: Sloting Plus

Ref: SP042255

€6.15

Ground and calibrated titanium axle with an 8-micron titanium coating: lightweight, toughness, and a wear resistance far superior to conventional axles. 55 mm in length and 2.38 mm in diameter (3/32"). 1 unit per bag.

Steel

45mm steel axle

Fabricante: Sloting Plus

Ref: SP041045

€3.35

Tempered and calibrated stainless steel axle from Sloting Plus: 45 mm in length and 2.38 mm in diameter (3/32''). Pack of 2 units. A reliable reference for demanding track setups.

In Stock

Steel

Axle 50mm x2

Fabricante: MITOOS

Ref: CXM054

€3.50

Rear axle of 50 mm made from high-quality steel (diameter 2.38 mm), in a pack of 2 units. A basic and reliable component for the setup and tuning of your slot car.

Holes

50mm x 3/32 Hollow axle PRO

Fabricante: Scaleauto

Ref: SC-1201

€3.80

PRO Scaleauto steel axle (ref. SC-1201) of 50 mm x 3/32, drilled and weighing only 0.90 g. A benchmark option for those looking to reduce rotating mass and fine-tune performance on track without compromising the rigidity of the assembly.

Eje hueco con tratamiento de titanio 2,38 x 52,5mm

Holes

60mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042160

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns, 60 mm in length and 2.38 mm in diameter (3/32"). Greater resistance to wear and traction in competition. Bag with 1 unit, weight 1.27 g.

Holes

57.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042157

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, in a format of 57.5 mm x 2.38 mm (3/32''). Greater resistance to wear and traction for demanding competition. 1.23 g. Bag with 1 unit.

Holes

55mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042155

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, measuring 55 mm x 2.38 mm (3/32"). A preparation solution that combines lightness and high resistance to wear and traction for demanding assemblies.

Holes

52.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042152

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns. 52.5 mm in length, 2.38 mm in diameter (3/32''), 1.12 g. One unit per bag.

Titanium

Titanium axle 2.38 x 57.5 mm

Fabricante: Sloting Plus

Ref: SP041157

€5.20

Calibrated titanium axle of 57.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1.1 g. Its paramagnetic nature and the rough finish on the ends make it unmistakable compared to conventional steel axles. Bag with 1 unit.

Titanium

Titanium axle 2.38 x 55 mm

Fabricante: Sloting Plus

Ref: SP041155

€5.20

Calibrated titanium axle with a diameter of 2.38 mm (3/32") and a length of 55 mm, weighing only 1.05 g. Paramagnetic by nature, extremely lightweight and easy to identify thanks to the rough finish on its ends. Bag containing 1 unit.

Titanium

Titanium axle 2.38 x 52.5 mm

Fabricante: Sloting Plus

Ref: SP041152

€5.20

Titanium axle of 52.5 mm in length and 2.38 mm in diameter (3/32''), weighing only 1 g. Its paramagnetic nature and the rough finish at the ends make it unmistakable on the bench. Bag with 1 unit.

Steel

Stainless steel axle 2.38 (3/32") x 57.5 mm

Fabricante: Sloting Plus

Ref: SP041057

€3.35

Uncompromising mechanical precision: the SP041057 axle from Sloting Plus, made of tempered and calibrated stainless steel, ensures a constant diameter of 2.38 mm (3/32") along its entire length of 57.5 mm. Set of 2 units, designed for serious competition.

Specials

Self-centering axle steel 50mm

Fabricante: Sloting Plus

Ref: SP049996

€2.48

Self-centering axle made of tempered and calibrated stainless steel, 50 mm in length x 2.38 mm in diameter (3/32''). Supplied in a pack of 2 units, ready for direct installation in your slot car setups.

Holes

60mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042060

€4.40

Hollow stainless steel axle, 60 mm in length and 2.38 mm in diameter (3/32''), weighing 1.26 g. Pack of 2 units designed for the preparation and precise setup of slot cars.

Holes

Hollow steel axle 3/32 (2.38) x 55 mm 2 pcs

Fabricante: Sloting Plus

Ref: SP042055

€4.40

Set of 2 hollow stainless steel axles from Sloting Plus in size 3/32" (2.38 mm) x 55 mm, calibrated along their entire length to ensure perfectly concentric rotation and reduce rotational weight without sacrificing stiffness.

Holes

52.5mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042052

€4.40

Calibrated stainless steel axle of 52.5 mm in length and 2.38 mm in diameter (3/32"), weighing 1.1 g. Supplied in a bag with 2 units, ready for your slot preparation workshop.

Holes

50mm Hollow steel axle x2

Fabricante: Sloting Plus

Ref: SP042050

€4.40

Calibrated stainless steel axle of 50 mm in length and 2.38 mm in diameter (3/32"), weighing 1.06 g. Pack of 2 units, ideal for precision setups in slot cars.

Steel

70mm steel axle

Fabricante: Sloting Plus

Ref: SP041070

€3.44

Tempered and calibrated stainless steel axle measuring 70 mm in length and 2.38 mm in diameter (3/32''), presented in a bag containing 2 units. A precision part for the preparation and tuning of slot cars.

Steel

65mm steel axle

Fabricante: Sloting Plus

Ref: SP041065

€3.44

Tempered and calibrated stainless steel axle, 65 mm in length and 2.38 mm in diameter (3/32''). Supplied in a bag with 2 units, ready for assembly and precise adjustment.

Steel

60mm steel axle

Fabricante: Sloting Plus

Ref: SP041060

€3.44

Tempered and calibrated stainless steel axle, 60 mm in length and 2.38 mm in diameter (3/32''). Reference SP041060 from Sloting Plus. Pack of 2 units, designed for those who approach car preparation with the same seriousness as the race.

Steel

55mm steel axle

Fabricante: Sloting Plus

Ref: SP041055

€4.40

Tempered and calibrated stainless steel axle measuring 55 mm in length and 2.38 mm in diameter (3/32''). Supplied in a pack of 2 units, it is the foundation on which the rear transmission of your slot car assembly rests.

Showing 25-48 of 63 item(s)