Transmission

We select each pulley and belt with a focus on what truly makes a difference on the track. If you are looking for parts for a competition 4WD chassis or for a rally-slot project, you will find what you need with technical criteria behind it.

All products in Transmission

SC-1704A - Polea Alumino Mecanizado 6,5mm Eje 3mm. Dorada

Pulleys

SC-1704A - Machined Aluminium Pulley 6.5mm Shaft 3mm. Gold.

Fabricante: MSC

Ref: SC-1704A

€2.40

Scaleauto machined aluminium pulley with a diameter of 6.5 mm and a 3 mm shaft in a striking gold finish. A lightweight and precise transmission component, designed for slot car setups that require accuracy and mechanical reliability.

Polea UNIVERSAL Ø10 eje 2,38 mm. ROJO Slotingplus

Out-of-Stock

Pulleys

UNIVERSAL pulley Ø10 shaft 2.38 mm. RED

Fabricante: Sloting Plus

Ref: SP079932

€6.05

Universal pulley made of duraluminium with a conical interior design for belts with a diameter of 1 and 1.5 mm. Improves traction, tolerates misalignments, and reduces the risk of belt disengagement. Includes M2 x 3 mm allen screw. Bag with 2 units.

View

Polea UNIVERSAL Ø8 eje 2,38 mm. AZUL Slotingplus

Pulleys

UNIVERSAL pulley Ø8 shaft 2.38 mm. BLUE

Fabricante: Sloting Plus

Ref: SP079931

€6.75

Cone-shaped internal design duraluminium pulley for 1 and 1.5 mm belts, with a 2.38 mm shaft and finished in blue. Improves traction and tolerates misalignment between axles. Pack of 2 units and includes M2 x 2.5 mm allen screw.

SC-1700A - Correa Transmisión Ultrafina 1 x 55 mm de Scaleauto

In Stock

Belts

Ultrafine Transmission Belt 1 x 55 mm

Fabricante: MSC

Ref: SC-1700A

€2.48

Ultra-thin transmission belt of 1 x 55 mm manufactured by Scaleauto, reference SC-1700A. An essential part to keep the transmission of your slot car in perfect condition, with the exact measurements required for careful preparation.

CX M224 - CoPol Alu 40z + 15z 21mm cartrix mitoos

Cross crowns

CoPol Alu 40t + 15t 21mm

Fabricante: MITOOS

Ref: CXM224

€9.44

40-tooth crown gear and 15-tooth MXL pulley machined from a single piece of aluminium. Module 0.5 mm, tooth width 1.5 mm, and outer diameter of 21 mm. Direct attachment to a 2.38 mm (3/32") shaft using an M2.5 mm Allen screw.

CX M223 - CoPol Alu 38z + 15z 20mm cartrix mitoos

In Stock

Cross crowns

CoPol Alu 38t + 15t 20mm

Fabricante: MITOOS

Ref: CXM223

€9.44

Machined aluminium part that integrates a 38-tooth crown gear and a 15-tooth MXL pulley in a single block. Module 0.5 mm, tooth width 1.5 mm and outer diameter of 20 mm, for shafts of 2.38 mm (3/32"). Fixing by M2.5 mm DIN 913 allen screw.

Belts

52mm blue drive belt

Fabricante: Sloting Plus

Ref: SP079952

€4.16

Sloting Plus rubber drive belt in blue to easily identify the size of 52 mm at a glance. Section of 1 mm, outer diameter 52 mm and pack of 4 units to always have a spare on hand.

Belts

50mm yellow drive belt

Fabricante: Sloting Plus

Ref: SP079950

€4.00

Sloting Plus rubber drive belt in yellow, Ø50 mm outer diameter and 1 mm section. The colour code allows you to quickly see which size you have mounted on each axle. Pack of 4 units.

Belts

87d toothed belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A87

€3.60

Scaleauto toothed belt with 87 teeth and 1.5 mm thickness, designed for transmission systems in competitive slot car setups. A specific replacement part that ensures a clean and consistent transmission when the original reaches its limit.

Belts

85d toothed belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A85

€3.60

Scaleauto toothed belt with 85 teeth and 1.5 mm thickness, designed for slot transmissions that require precision and smooth power delivery. Reference SC-1720A85.

Belts

Toothed belt 67d 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A67

€3.49

Scaleauto 67-tooth timing belt with a thickness of 1.5 mm, designed for drive systems in slot cars. An essential component in any setup aiming for a smooth, quiet, and well-adjusted transmission.

Belts

65d toothed belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A65

€3.60

65-tooth timing belt with a thickness of 1.5 mm from Scaleauto, designed for belt drive systems in slot cars. A direct and reliable replacement to maintain traction without performance loss.

Belts

63 tooth timing belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A63

€3.49

Scaleauto toothed belt with 63 teeth and 1.5 mm thickness, designed for belt drive systems in slot cars. A direct and reliable replacement part to keep your car in top condition.

Belts

120d toothed belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A120

€3.60

Scaleauto 120-tooth timing belt with a thickness of 1.5 mm, designed for drive systems in slot cars that demand precision and reliability on every lap.

Belts

Toothed belt 118d 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A118

€4.48

Scaleauto 118-tooth timing belt with a thickness of 1.5 mm (ref. SC-1720A118), designed to ensure efficient and slip-free transmission in setups that require this specific pitch.

Belts

115d toothed belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A115

€4.57

Scaleauto toothed belt with 115 teeth and 1.5 mm thickness for belt drive in slot cars. A key component to maintain smooth and efficient transmission, especially in competition setups.

Pulleys

11T PULLEY 1.8MM BELT Green

Fabricante: MSC

Ref: SC-1721A

€5.75

Scaleauto 11-tooth pinion, designed for 1.8 mm belt and 2.38 mm shaft. Green colour for quick identification in the workshop. A precision component to keep your slot car's transmission in top condition.

Pulleys

12D GEAR PULLEY 1.8MM Belt Black

Fabricante: MSC

Ref: SC-1722A

€5.75

Scaleauto 12-tooth pinion for 1.8 mm belt and 2.38 mm shaft. A small part with a key role in the transmission: consistent performance and hassle-free installation.

In Stock

Belts

Toothed belt 93 d 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A93

€3.94

Scaleauto toothed belt with 93 teeth and 1.5 mm thickness, designed for belt drive systems in slot cars. Original spare part reference SC-1720A93 to keep the transmission in perfect condition.

Belts

94-tooth timing belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A94

€3.60

Scaleauto 94-tooth timing belt with a thickness of 1.5 mm (ref. SC-1720A94), designed for slot car chassis transmission systems that require precision and an exact replacement of the original spare part.

Belts

95 tooth timing belt 1.5mm thickness

Fabricante: MSC

Ref: SC-1720A95

€3.49

Scaleauto toothed belt with 95 teeth and 1.5 mm thickness (ref. SC-1720A95), designed for belt drive systems in slot cars. An essential replacement component when the track demands performance and reliability in every corner.

Belts

56mm green drive belt

Fabricante: Sloting Plus

Ref: SP079956

€4.00

Green rubber transmission belt from Sloting Plus (ref. SP079956): Ø56mm outer diameter and Ø1mm section. The colour code allows you to quickly identify the size installed on each axle, avoiding confusion during assembly or adjustment. Pack of 4 units.

Belts

54mm purple transmission belt

Fabricante: Sloting Plus

Ref: SP079954

€4.16

Purple rubber drive belt from Sloting Plus: 54 mm, 1 mm section and 56 mm outer diameter. The colour coding allows you to instantly identify the size and compare sensations between axles with total precision. Bag with 4 units.

Belts

MXL belt z92 2mm wide - 1 unit

Fabricante: MITOOS

Ref: CXM492

€3.47

MXL timing belt with 92 teeth and 2 mm width for slot car transmission systems. A precision spare part that ensures a clean and consistent transmission on track.

Showing 25-48 of 73 item(s)